Engineering involves the application of science. Many engineers are fascinated by scientific investigation and eager to enhance their understanding of the pure sciences. Likewise, many scientists wish to see their theories applied towards new technologies. If either of these describes you, then this double degree course is ideal for you.
Personalise your study from nine engineering specialisations and over twenty areas of science. The result is an educational experience uniquely tailored to meet your interests and aspirations. The various combinations offer diversity, flexibility and numerous career options.
The first year provides the scientific and design foundations for engineering. It focuses on real-life problems to help you understand the interaction between engineering and society. It also introduces the range of engineering disciplines. You will pursue your specialist engineering discipline from year two.
The combinations of engineering and science fields are almost limitless. You might combine environmental engineering with atmospheric science, ecology and conservation biology, genetics, plant sciences, zoology, chemistry, computational science, geographical science or statistics. Or you could augment your aerospace degree with studies in physics or astrophysics, pair mechanical engineering with applied mathematics, or combine chemical engineering with geosciences. The choice is yours.
NOTE: For learning outcomes and other relevant information of this double degree, refer to the single degree entries:
The requirements below detail what you must study in order to complete this double degree course and receive the awards.
The course progression mapcourse progression map (https://www.monash.edu/engineering/current-students/enrolment-and-re-enrolment/course-information/course-maps) provides guidance on unit enrolment for each semester of study.
Units are 6 points unless otherwise specified. You must complete 240 points:
1. 144 points must be completed in Parts A, B, C, D and E (Level 1 only) as described below in the Bachelor of Engineering (Honours) component.
Refer to E3001 Bachelor of Engineering (Honours) single degree entry for the details of mandatory professional recognition requirements.
2. 96 points must be completed in Parts A and B as described below in the Bachelor of Science component, of which:
- at least 30 points and no more than 36 points of level 1 units must be completed
- at least 60 points must be completed at levels 2 and 3
- at least 24 points must be completed at level 3
- you must complete the level one sequences at stage one before enrolling in level two science units
Bachelor of Engineering (Honours) is a specialist course that develops through four themes that combine to underpin engineering practice: fundamentals and foundational skills, design, knowledge and applications, and professional practice.
Part A. Engineering fundamentals and foundational skills (12, 18 or 24 points)
These will develop your understanding of natural and physical sciences, mathematics, numerical analysis, statistics, and computer and information sciences that underpin all engineering disciplines.
If you have not completed the equivalent of VCE Physics and/or VCE Specialist mathematics then you must complete foundation units in physics and/or mathematics respectively:
Note: If you need to take both foundation units you will need to overload in year 1 or 2 and increase the total credit points needed for the double degree by 6 points.
You must complete:
Part B. Engineering design (18 points)
This will develop the engineering techniques, tools and resources for the conduct, design and management of engineering design processes and projects, both in the industrial setting and in the development of research experiments.
You must complete:
- ENG1001 Engineering design: Lighter, faster, stronger
- ENG1002 Engineering design: Cleaner, safer smarter
- ENG1003 Engineering mobile apps
Part E. Level 1 elective study (6, 12 or 18 points, depending upon the number of units you need to complete for Part A)
At least 12 elective points from the first year must be used in fulfilling the requirements of the partner course. Therefore, if you are required to take 12 points of foundation units you will need to overload by 6 points.
You must complete at least one of the following available on your campus of enrolment:
- CHM1011 Chemistry I or CHM1051 Chemistry I advanced
- ENE1621 Environmental engineering
- ENG1021 Spatial communication in engineering
- ENG1051 Materials for energy and sustainability
- PHS1002 Physics for engineering
- MAT1830 Discrete mathematics for computer science
- RSE1010 Natural resources engineering
- CHE2161 Mechanics of fluids
- ECE2041Not offered in 2019 Telecommunications
- ECE2072 Digital systems
- FIT2085 Introduction to computer science for engineers
- MAE2405 Aircraft performance
- MEC2404 Mechanics of fluids
- TRC2001 Introduction to systems engineering
Part C. Engineering knowledge and application and Part D. Professional practice (108 points)
Part C will provide in-depth knowledge of the specific engineering methods of a branch of engineering and will integrate the specific engineering methods and discipline knowledge into practice. You will develop skills to identify and apply knowledge of contextual factors impacting the engineering discipline. Additionally, your studies will focus on your understanding and application of the scope, principles, norms, accountabilities and bounds of contemporary engineering practice in your discipline.
Part D will develop your skills in readiness for the engineering workplace. You will develop skills in effective team membership and team leadership, the use and management of commercially relevant data, and the legal responsibilities of engineers. This study will integrate the theme 'Engineering knowledge and application' with your specialist field of engineering.
You must complete Part C and Part D in one of the following specialisations:
Bachelor of Science is a comprehensive course and it will provide you with a broad, general science education, as well as specialist training in one or more science disciplines.
Part A. Science specified study (48 points)
This will provide you with the mathematical or statistical foundation for your study of science and address the nature of science and its communication. It will also expose you to different science disciplines, contributing breadth to your understanding of science and giving you the opportunity to learn about several disciplines before finalising your choice of major.
Although the requirements in Part A appear to exceed 48 points, a level 1 sequence is typically counted towards your chosen major (Part B) and not towards this Part.
You must complete:
Approved science sequences
a. At least two level 1 approved science sequencesapproved science sequences (http://www.monash.edu.au/pubs/2019handbooks/undergrad/sci-level-1-sequences.html) (24 points)
Normally, the units in a level 1 sequence are required for the completion of a related minor or major. The choice of level 1 sequences will influence your choice of level 2 and level 3 units and will lay the foundation for your major.
Mathematics and statistics unit
b. You are not required to complete the level one mathematics or statistics unit for the Science component as you complete a corresponding mathematics requirement in your partner course, ENG1005, which is equivalent to MTH1030. You can still choose to complete a level one sequence in mathematics.
Additional level 1 units
c. Any additional level 1 units (usually one or two) required taking the total level 1 science listed units to 36 credit points. Level 1 science listed units are chosen from units listed under any major, extended major or minor offered in the Bachelor of Science or from the following:
- MTH1010 Functions and their applications
- SCI1200 Humans, evolution and modern society
- SCI1300 Climate change: From science to society
- SCI1800 The sustainable planet
Note 2: You can replace one level 1 science listed unit with a level 2 or level 3 science listed unit.
Years two and three
d. One unit (6 points) from:
- SCI2010 Scientific practice and communication
- SCI2015 Scientific practice and communication (advanced).
e. Any additional units required to make the total level 2 and 3 Bachelor of Science listed units to 60 points (inclusive of the unit in d. and the units in your major in Part B), with at least 24 points at level 3, chosen from:
- SCI2400 From Galileo to GPS: How astronomy shapes our lives
- SCI3910 Schools science project
- SCI3920 Science internship
- SCI3930 Career skills for scientists
- units listed under any major, extended major or minor offered in S2000 Bachelor of Science
Part B. Science listed major (48 points)
This will provide you with a focused program of study that will develop your expertise in one discipline area. You will learn to develop, apply and communicate an advanced level of understanding of the concepts and theoretical frameworks that constitute the knowledge base of the discipline.
Complete at least one science listed major from those listed below. A major requires eight units with no more than two units at level 1 (12 points) and at least three units (18 points) at level 3. You may replace the major with an extended major by using the elective units available in Part A.
It is recommended that you consider completing level 2 units in more than one area of science to maximise your choice of major at level 3.
If you intend to undertake an honours year you should ensure you complete the specific units required as a prerequisite for honours in your chosen major area of study.
Minors, majors and extended majors
Refer also to the table of minors and majors by campusminors and majors by campus (http://www.monash.edu.au/pubs/2019handbooks/undergrad/sci-bsc-minor-major-extended-major.html) which details if an area of study is available as a minor, major or extended major.
Note: Psychology is taught by the Faculty of Medicine, Nursing and Health Sciences.
You may be eligible to exit the double degree program and graduate with either a Bachelor of Engineering (Honours) named degree or a Bachelor of Science after four or three years respectively, depending on the units studied.
If you wish to graduate with a Bachelor of Engineering degree prior to the completion of the double degree you must have completed at least 192 points of studies, including all of the requirements in Part A, B, C and D for the particular engineering specialisation.
If you wish to graduate with a Bachelor of Science prior to the completion of the double degree you must have completed at least 144 points of studies, including all of the requirements in Part A and B for the Bachelor of Science degree.
You may be eligible to apply for a one-year honours course once you have successfully completed this double degree, or have completed all of the requirements for one of the single degrees including a total of 144 points. The following honours course applies:
- S3701 Bachelor of Science (Honours)
You are usually eligible to apply for honours if you achieve a distinction grade average (70 percent) or above in 24 points of studies in relevant units at level 3. This sometimes also means you need to have completed specific units. Science students should refer to the honours prerequisites table.
If you successfully complete the Bachelor of Science you may proceed to:
- S5003 Postgraduate Diploma in Science (Malaysia only)
- S6000 Master of Science
- S6001 Master of Financial Mathematics*
- S6002 Master of Environment and Sustainability**
- S6003 Master of Mathematics