Skip to Content

The 3rd International Symposium on Computational Particle Technology

17-21 November 2021
Suzhou (China) and Melbourne (Australia)

Symposium Introduction 2021

Understanding the fundamentals governing particle and particle-fluid flows is of paramount importance to the design, control and optimisation of particulate and multiphase processes in many industries. In the past, different measurement techniques have been developed, but there have been problems in probing the underlying physics and solving practical problems generally and reliably. Alternatively, a promising technique that can overcome these problems is computer simulation. This often involves a multiscale approach to understand phenomena at different length and time scales which, for particles, includes: (i) at the molecular/sub-particle scale to determine the interaction forces between particles, fluid and wall, and the transport behaviour between particles and/or pores; (ii) at the micro/particle scale to understand particle flow and force structures in relation to different flow conditions; (iii) at the meso/macro scale to formulate governing equations, constitutive relations and boundary conditions for continuum-based process modelling and simulation; and (iv) at the process equipment scale to quantify flow and process performance for control and optimisation. In the past two decades or so, with the rapid development of computer technology, many advanced computational technologies, either discrete or continuum-based, have been developed and applied to tackle problems of various types.

The third International Symposium on Computational Particle Technology will follow the spirit of the first one in Suzhou in March 2016, as well as the second one in Melbourne in Dec 2018. It will be held in Suzhou on 17 - 21 Nov 2021. It aims to provide a forum to discuss the frontier and challenging problems in the modelling and simulation of complex particulate and multiphase processes, covering a wide spectrum from fundamental research to industrial application. A great emphasis will also be placed on the collaboration between academic research and engineering applications. This will be achieved by extending invitation to engineers and academics across the broad engineering disciplines globally. Another great emphasis will be placed on social activities, this will not only generate more opportunities for exchanging ideas and building connections, but also create an outstanding atmosphere for collaboration in particle research worldwide.

Participants are encouraged to submit their full paper after the symposium.

Please see Call for Papers here.

For all enquiries and submission of abstracts, please send to ARC.Hub.Secretariat@monash.edu

Co-organisers:

  • ARC Research Hub for Computational Particle Technology
  • JITRI Institute for Process Modelling and Optimisation
  • Monash University - Southeast University Joint Research Institute
  • Monash Suzhou Research Institute
  • Xi’an Jiaotong University
  • Jiangxi University of Science and Technology
  • Northeastern University

Sponsors:

  • Fujian Longking Co., Ltd
  • CNPIEC KEXIN LTD
  • Elsevier
  • Yanghe Group Co., Ltd

Organising Orgs

Venue

Venue: Building 9, Monash Suzhou Research Institute, SangTianDao Innovation Park (Building 2), 1 Huayun Rd, SIP, Suzhou, Jiangsu, China.

地址: 江苏省苏州市工业园区区华云路1号桑田岛科创园2号楼蒙纳士苏州研究院9楼

Baidu Map link.


Online: Zoom available for overseas attendees.

Zoom Meeting Guide to Chairs, Presenters and Audience

  1. Please download and install the latest version of Zoom. https://zoom.us/download
  2. For all speakers, please carry out scheduled Zoom tests which are shown below. Please login to Zoom using the email you have used for registration. If the Zoom link does not work, please use the provided Zoom ID and password to enter.
  3. Practice Zoom Webinar ID: 846 0677 6672 Password 059735

    https://monash.zoom.us/j/84606776672?pwd=Q0pEQmpPNjk3blJVU09mRFk1Sy9idz09

    • Nov 15: Beijing time 9:00am-10:00am & 4:00pm-5:00pm
    • Nov 16: Beijing time 9:00am-10:00am & 4:00pm-5:00pm
    • Nov 17: Beijing time 9:00am-10:00am & 4:00pm-5:00pm
  4. Note that totally there are 32 sessions in the 3-day symposium, and each session has its own Webinar Link (ID/passwords). Please find the session you want to join, and click the link provided or use the Zoom ID/passwords.

For Session Chairs:

  • To session chairs: all session chairs must change/set your display name to “Chair_Your
    name (Affiliation)”. In order to do so, hover over your name in the participants list and click
    “Rename” Please only do so during the session in which you are chairing.
  • Check the QnA Section for questions raised by the audience, keep number of questions to a
    minimum.
  • If a presenter did not turn up or unavailable, skip to the next speaker and come back to the
    skipped speaker later in the session.
  • Be mindful of the time that each speaker took; ensure session ends on time stipulated on the
    program.

For Presenters:

  • To Presenters: All presenters must change/set your display name to “Speaker_Your name
    (Affiliation)”. In order to do so, hover over your name in the participants list and click
    “Rename” Please only do so during the session in which you are presenting. Otherwise, keep
    your name as "Your name (Affiliation)” and mute yourself.
  • Presenters must make sure to finish the talk within the allocated time: 45 minutes for plenary, 30 minutes for keynote, 15 minutes for regular presentations, and 10 minutes for student presentations.

For Posters:

  • All posters are scheduled to attend online. For those who still can physically attend the conference in Suzhou, you are welcome to display your posters at the conference venue.
  • Poster session will be held 13:30 pm-15:00 pm on 19 of November (Beijing Time), please check the conference program.
  • There are two ZOOM meeting rooms scheduled to this poster session.
    Poster Session No. 1:
    https://monash.zoom.us/j/9745751486?pwd=bUhLUzVtMnQvRW0vNzVZVzJlRmN2QT09
    Poster Session No. 2:
    https://uws.zoom.us/j/89718359188?pwd=emJjRlQzUWFqK1JhUER2QmtVRVVwUT09
  • After entering the ZOOM meeting room, presenters please look for your breakout room (named by poster abstract ID and presenter name), then enter the breakout room and share your
    poster.
  • During the 1.5-hour poster session, please share your poster and prepare for answering questions from audiences.
  • A panel of three may visit each breakout room. Two best posters will be selected from each Poster Session.
  • Audience could join interested posters according to Step 4.

Symposium Schedule in Different Time Zones

Region/City

Time Zones

Morning Sessions (Nov 18, 19 and 20)

Afternoon Sessions (Nov 18, 19 and 20)

Local time (Beijing Time)

UTC + 8

09:00am-12:30pm

1:30pm-6:00pm

Melbourne/Sydney

UTC + 11

12:00pm - 3:30pm

4:30pm - 9:00pm

Brisbane

UTC + 10

11:00am - 2:30pm

3:30pm - 8:00pm

Tokyo

UTC + 9

10:00am - 1:30pm

2:30pm - 7:00pm:

United Kingdom

UTC

1:00am - 4:30am

5:30am - 10am

Central Europe (Paris)

UTC + 1

2:00am - 5:30am

6:30am - 11am

US East Coast (New York)

UTC - 5

8:00pm - 11:30pm (-1 day)

12:30am - 5:00am

US Central Time (Chicago)

UTC - 5

7:00pm - 10:30pm (-1 day)

11:30pm (-1 day) - 4:00am

US West Coast (Los Angeles)

UTC - 7

5:00pm - 8:30pm (-1 day)

9:30pm (-1 day) - 2:00am

Program

Click here for full Symposium Program

Click here for Zoom links for all sessions (alternatively, refer to the program below)

Program Sessions:

For Day 1 Morning Session, Please Click Here (Sessions 1-5)

For Day 1 Afternoon Session, Please Click Here (Sessions 6-10)

For Day 2 Morning Session, Please Click Here (Sessions 11-15)

For Day 2 Afternoon Session 1, Please Click Here (Sessions 16-19)

For Day 2 Afternoon Session 2, Please Click Here (Sessions 20-23)

For Day 3 Morning Session, Please Click Here (Sessions 24-27)

For Day 3 Afternoon Session, Please Click Here (Sessions 28-32)

Day 1 (Thursday, 18 November 2021)

08:45-09:00

Symposium Opening

Join

Zoom ID: 818 4286 9343

Password: 652899

(Onsite Room 901)

Prof. Aibing Yu

 

Session 1

Join

Zoom ID: 818 4286 9343

Password: 652899

(Onsite Room 901)

Chair: Wenqi Zhong, Aibing Yu

09:00-09:45

Plenary: Professor Liang-Shih Fan

Chemical Looping Technology –Thermal and Dynamic Limits from Computational Analysis

09:45-10:30

Plenary: Professor Jennifer Curtis

Flow Behavior of Aspherical Particles

 

Session 2

Join

Zoom ID: 882 1804 4440

Password: 415166

(Onsite Room 901)

Chair: Jianglong Yu, Shunying Ji

Session 3

Join

Zoom ID: 886 7510 2646

Password: 763378

(Onsite Room 911)

Chair: Xizhong An, Kun Luo

Session 4

Join

Zoom ID: 884 7009 4266

Password: 335404

(Onsite Room 905)

Chair: Yuqing Feng, Mikio Sakai

Session 5

Join

Zoom ID: 871 8466 0479

Password: 772558

(Onsite Room 913)

Chair: Mao Ye, Jidong Zhao

11:00-11:30

Keynote: KYN003 - A DEM Model of Arbitrarily Shaped Particles Considering Bond-Failure Criterion (Shunying Ji, Dalian University of Technology)

Keynote: KYN033 - Multi-scale numerical simulations of chemical looping combustion (Kun Luo, Zhejiang University)

Keynote: KYN028 - Advanced discrete element modeling for digital twin (Mikio Sakai, University of Tokyo)

Keynote: KYN027 - Continuum-discrete coupling for multiscale modeling of granular media (Jidong Zhao, Hong Kong University of Science and Technology)

11:30-12:00

Keynote: KYN050 - Numerical simulations and Industrial applications of complex gas-solid reaction system (Wenqi Zhong, Southeast University)

Keynote: KYN017 - Numerical and experimental investigation of particle or droplet deposition in a realistic human nasal cavity (Zhenbo Tong, Southeast University)

Keynote: KYN039 - Multiscale heterarchical comminution: from landslides to SAG mills (Itai Einav, University of Sydney)

Keynote: KYN031 - Modeling and Optimization of Slurry Loop Reactors of Swelling Particles (Ning Yang, University of Chinese Academy of Sciences)

12:00-12:30

Keynote: KYN052 – Understanding The Formation Of Plastic Layers During Coal Coking (Jianglong Yu, Monash University)

Keynote: KYN014 - Numerical Investigations on Powder Bed Fusion Additive Manufacturing of Refractory Rare Metals (Xizhong An, Northeastern University)

Keynote: KYN030 - Development and Application of Computational Particulate Multiphase Flow Modelling in Mineral and Other Process Industries (Yuqing Feng, CSIRO)

Keynote: KYN022 - DEM-based Modelling of Thermo-chemical Behaviours and its Applications (Qinfu Hou, Monash University)

 

Session 6

Join

Zoom ID: 889 5312 0622

Password: 894991

(Onsite Room 901)

Chair: Vladimir Strezov, Ruiping Zou

13:30-14:15

Plenary: Professor Lei Jiang

Bioinspired Super-wettability System and Beyond——Quantum-confined Superfluid: Energy Conversion,

Chemical Reaction and Biological Information Transfer

14:15-15:00

Plenary: Professor Chuan-Yu Wu

LBM-DEM Analysis of Infiltration and Resuspension of Dilute Particle Suspensions

 

Session 7

Join

Zoom ID: 869 2254 7771

Password: 906015

(Onsite Room 901)

Chair: Ning Yang, Dianyu E

Session 8

Join

Zoom ID: 827 6272 3244

Password: 665069

(Onsite Room 911)

Chair: Hao Zhang, Yu Zhang

Session 9

Join

Zoom ID: 885 6787 1765

Password: 707400

(Onsite Room 905)

Chair: Yijiao Jiang, Yansong Shen

Session 10

Join

Zoom ID: 825 0104 9006

Password: 290043

(Onsite Room 913)

Chair: Limin Wang, Haiping Zhu

15:30-16:00

Keynote: KYN048 - The Application of AI and Digital Tech into Bulk Materials Handling (Renhu Pan, Longking)

NB: This is student session for Best Presentation Awards

15:30-15:40 ABS141 - Numerical Investigation of The Area of Inlet Cross Section on Separation Performance of Hydrocyclone with a Tangential Inlet (Haihan Fan, Jiangxi University of Science and Technology)

15:40-15:50 ABS143 - Experimental and Numerical Study of the Effect of Vortex Finder Wall Thickness on Separation Performance in a Small Hydrocyclone (Zhongfang Su, Jiangxi University of Science and Technology)

15:50-16:00 ABS149 - Particle-scale Energy Fluctuation of Granular Particles When Discharged from a Wedge-shaped Hopper with Different Dimensional Ratios of the Outlet’s Width to the Particle’s Diameter (Zhehan Liao, Chongqing University)

16:00-16:10 ABS151 - Study on thermal-hydraulic characteristics of steam jet condensation in crossflow of water (Chenying Liu, Xi’an Jiaotong University)

16:10-16:20 ABS152 - Intelligent identification of gas-liquid flow regime in a long pipeline-riser system (Xinyu Wang, Xi’an Jiaotong University)

16:20-16:30 ABS153 - Numerical simulation on Structure Optimization of escape-pipe of cyclone separator with downward outlet (Leilei Zhang, Xi'an University of Architecture and Technology)

16:30-16:40 ABS002 - Effect of Basset Force on Single Bubble Motion: A Coupled CFD–DEM (Huiting Chen, Shanghai University)

16:40-16:50 ABS006 - Influence of baffles on mixing and heat transfer characteristics in an internally heated rotating drum (Bowen Liu, Monash University)

16:50-17:00 ABS015 - Fluctuation of particles during funnel flow discharge from flat-bottomed silos (Dancheng Zhang, Chinese Academy of Sciences)

17:00-17:10 ABS017 - Gas-Solid Flow Characteristics in a Turbulent Bed with Variable Gas Velocity (Yunpeng Zhao, China University of Petroleum (Beijing))

17:10-17:20 ABS019 - Computational study on production of TiO2 nanoparticles through chemical vapor deposition process using TiCl 4 vapor hydrolysis (Wei Liu, Southeast University)

17:20-17:30 ABS020 - Inner and outer angle of repose for burden distribution model in bell-less blast furnace (Duoyong Zhang, Central South University)

17:30-17:40 ABS009 - Pore-scale Simulations of Fluid Flow and Heat Transfer in Arrays of Heated Cylinders (Shuang Song, University of New South Wales)

Keynote: KYN010 - Multi-scale Modelling of Grinding Processes (Runyu Yang, University of New South Wales)

Keynote: KYN013 - Regime Transition of Flow of Ellipsoidal Particles in a Shear Cell (Haiping Zhu, Western Sydney University)

16:00-16:30

Keynote: KYN049 - Computational Fluid Dynamic and Molecular Dynamic Simulation of Graphene Formation in a Plasma Fluidized Bed Reactor (Ruoyu Hong, Fuzhou University)

Keynote: KYN041 - Modelling of reacting flows and industry applications (Yansong Shen, University of New South Wales)

Keynote: KYN008 - Low-dimensional Latent Space Physics Based on an Improved Neural Network Model for Flow Past Porous Spheres (Mao Ye, Chinese Academy of Sciences)

16:30-

17:00

Keynote: KYN012- Scale-up Fabrication of Functional Nanoparticles for Smart Windows (Xuchuan Jiang, Jinan University)

Keynote: KYN036 - Packing Wet Mono-sized Grains with Tailored Features (Yixiang Gan, The University of Sydney)

Keynote: KYN054 - Robust DEM modelling of Arbitrarily Shaped Particles – Energy-Conserving Contact Theory and Models (Yuntian Feng, Swansea University)

17:00-17:15

ABS101 - CFD-DEM study of the multiphase flow in dense medium cyclones (Kaiwei Chu, Shandong University)

Keynote: KYN045 -

Heterogeneous Molecular Electrocatalysts for Carbon Dioxide Reduction in Neutral Water (Yijiao Jiang, Macquarie University)

Keynote: KYN001 - Large-scale Direct Numerical Simulation for Investigating the Effects of Mesoscale Structure in Gas-solid Flow (Limin Wang, Chinese Academy of Sciences)

17:15-17:30

ABS121 - Modelling the Segregation of Bidisperse Particles in a Blade Mixer Using Continuum Approaches (Liuyimei Yang, Monash University)

17:30-17:45

ABS136 - Numerical flow simulation of fresh concrete in truck mixer (Guodong Cao, Xiangtan University)

ABS082 - Investigation of the mixing and granulation behavior of iron ore fines in horizontal high-shear granulator (Yang You, Chongqing University)

ABS042 - CFD-DEM study of spout incoherence phenomena in a conical spouted bed (Yuanhe Yue, University of New South Wales)

17:45-18:00

ABS091 - Linking Particle Properties to the Quality of Spread Powder Layer by Discrete Element Modelling (Yi He, Monash University)

ABS133 - Pore-Scale Direct Numerical Simulation of Particulate Flow Permeating through Fibrous Filter Obtained from X-ray CT (Toru Ishigami, Hiroshima University)

ABS051 - Segregation of a Non-Spherical Intruder in Vibrated Granular Bed (Jinpeng Qiao, Western Sydney University)

Day 2 (Friday, 19 November 2021)

 

Session 11

Join

Zoom ID: 837 3621 0087

Password: 712487

(Onsite Room 901)

Chair: Karen Hapgood, Zongyan Zhou

09:00-09:45

Plenary: Professor Dongyuan Zhao

Interfacial Assembly for the Synthesis of Novel Hierarchical Functional Mesoporous Materials

09:45-10:30

Plenary: Professor Xiaodong Chen

Life Quality Engineering and Well Being - Food and Medicine ‘Processing below the Neck’

 

Session 12

Join

Zoom ID: 853 6668 4691

Password: 192141

(Onsite Room 901)

Chair: Shunying Ji, Yongzhi Zhao

Session 13

Join

Zoom ID: 879 1947 8561

Password: 464940

(Onsite Room 911)

Chair: Shuiqing Li, Xizhong An

Session 14

Join

Zoom ID: 891 2505 9023

Password: 947826

(Onsite Room 905)

Chair: Mikio Sakai, Yijiao Jiang

Session 15

Join

Zoom ID: 840 1082 3990

Password: 654830

(Onsite Room 913)

Chair: Moubin Liu, Zhenbo Tong

11:00-11:30

Keynote: KYN002 - Modelling of Granular Flow of Non-spherical Particles (Zongyan Zhou, Jiangxi University of Science and Technology)

Keynote: KYN005 - Self-assembly of Granular Spheres (Kejun Dong, Western Sydney University)

Keynote: KYN038 - How to use AI to understand patterns in your data: case studies from particle simulations & experiments (Antoinette Tordesillas, University of Melbourne)

Keynote: KYN023 - Encapsulation Strategy for Spray-dried Powders in Food and Dairy Applications (Cordelia Selomulya)

11:30-12:00

Keynote: KYN042 - Research activities on nuclear fuel Particuology using DEM (Malin Liu, Tsinghua University)

Keynote: KYN015 - Numerical Investigation of Acoustic Agglomeration of Fine Particles Enhanced by Heterogeneous Condensation (Fengxian Fan, University of Shanghai for Science and Technology)

Keynote: KYN040- Visualising the photoelastic response stresses of complex particles using 3D printed polymers – a novel experimental approach (Karen Hapgood, Deaken University)

Keynote: KYN018 - A scale-independent modeling method for filtered drag in fluidized gas-particle flows (Qiang Zhou, Xi’an Jiaotong University)

12:00-12:15

ABS048 - Particle Condensation Growth and Water Vapor Distribution in Turbulence Pipe Flow (Yumeng Zhang, Lanzhou University)

ABS053 - IBM-LBM simulation of Red Blood Cell Movement in a Microchannel (Yu Zhang, Tsinghua University)

Keynote: KYN009 - Modelling Multiphase Flows Inside Hydrocyclones Towards Applications (Shibo Kuang, Monash University)

ABS111 - CFD-DEM study of burden distribution in an ironmaking blast furnace (Yinxuan Qiu, Monash University)

12:15-12:30

ABS093 - Fast Prediction of 3D Temperature Distribution in a Pulverized Coal Boiler based on Model Reduction of CFD via POD method (Xi Chen, Southeast University)

ABS088 - Dynamic penetration behaviors of single/multi-layer graphene using nanoprojectile under hypervelocity impact (Weifu Sun, Beijing Institute of Technology)

ABS126 - FMI Co-simulation of multibody dynamic models and discrete element method for mobile plant systems (Jieqing Gan, Bradken)

 

Session 16

Join

Zoom ID: 894 7612 5760

Password: 241336

(Onsite Room 901)

Chair: Runyu Yang, Dianyu E

Session 17

Join

Zoom ID: 838 6336 0070

Password: 474839

(Onsite Room 911)

Chair: Kun Luo, Qijun Zheng

Session 18

Join

Zoom ID: 879 2723 4720

Password: 226405

(Onsite Room 905)

Chair: Yuntian Feng, Shibo Kuang

Session 19

Links available below

(Onsite Room 913)

Chair: Qinfu Hou, Kejun Dong

13:30-14:00

Keynote: KYN019 - Continuum Modelling of Granular Flow and Mixing in Different Configurations of Bulk Solids Handling (Qijun Zheng, Monash University)

Keynote: KYN025 - Agglomeration and Breakage of Small Dry Particles in Turbulent Flows (Shuiqing Li, Tsinghua University)

Keynote: KYN032 - Adhesion behavior characterization and control of inorganic fine powder at high temperature for energy and environmental systems (Hidehiro Kamiya, Tokyo University of Agriculture and Technology)

NB: This is online Poster Session for Best Poster Awards

ZOOM Meeting #1

Join

Zoom ID: 974 575 1486

Password: 123456

ABS009, ABS018, ABS024, ABS028, ABS029, ABS031, ABS033, ABS034, ABS040, ABS041, ABS045, ABS046, ABS047, ABS052, ABS054, ABS058, ABS061, ABS062, ABS063, ABS066, ABS067, ABS070, ABS076, ABS081, ABS085, ABS086

ZOOM Meeting #2

Join

Zoom ID: 897 1835 9188

Password: 040546

ABS089, ABS090, ABS099, ABS105, ABS110, ABS114, ABS115, ABS116, ABS118, ABS122, ABS123, ABS124, ABS128, ABS131, ABS137, ABS138, ABS139, ABS140, ABS142, ABS144, ABS145, ABS150, ABS154, ABS158, ABS160

14:00-14:30

Keynote: KYN021 - Recent Research Progress of Discrete Element Modeling and Simulation Laboratory (Yongzhi Zhao, Zhejiang University)

Keynote: KYN044 - Study on the Bubble Disintegrationin Oxygen Pressure Acid Leaching Process of the Sphalerite (Yan Liu, Northeastern University)

Keynote: KYN035 - A semi-resolved CFD-DEM approach for particulate flows with thermal convection (Moubin Liu, Peking University)

14:30-14:45

Keynote: KYN053 - Computational Modelling on Mechanical Properties of Bioinspired Materials and Their Applications (Yuan Cheng, Monash University)

ABS027 - CPFD modelling of hydrodynamics, combustion and in-site catalytic DeNOx in an industrial CFB boiler (Jian Chang, North China Electric Power University)

ABS011 - Effects of Shaft Angle Design on the Performance of an Ironmaking Blast Furnace (Xiaobing Yu, University of New South Wales)

14:45-15:00

ABS146 - CFD-DEM Study on Coke Combustion in The Raceway of an Ironmaking Blast Furnace (Dianyu E, Jiangxi University of Science and Technology)

ABS107 - Numerical Simulation Study on Dynamic Deposition of Particles on the blade of Flue Gas Turbine (Ying Guo, China University of Petroleum)

15:00-15:15

ABS156 - Integrating Carbon dots into graphite carbon nitride for highly efficient visible light driven-photocatalytic hydrogen evolution (Xiaohong Yang, Northeastern University)

ABS159 - Suspension, Power Consumption Characteristics of Particulate Matter and Scale-up Criteria under Different Flow Field Structures Driven by Machinery (Xiaolong Li, Northeaster University)

ABS163 - Computer simulation of the packing of nanoparticles (Lin Wang, Monash University)

 

Session 20

Join

Zoom ID: 834 8128 7773

Password: 138839

(Onsite Room 901)

Chair: Jie Xiao, Zongyan Zhou

Session 21

Join

Zoom ID: 898 6770 3942

Password: 224305

(Onsite Room 911)

Chair: Dianyu E, Qijun Zheng

Session 22

Join

Zoom ID: 820 3336 0205

Password: 568040

(Onsite Room 905)

Chair: Shibo Kuang, Yuqing Feng

Session 23

Join

Zoom ID: 832 3033 6301

Password: 108782

(Onsite Room 913)

Chair: Qinfu Hou, Kejun Dong

NB: These are four student sessions for Best Presentation Awards.

15:30-15:40

ABS157 - Modeling particulate flows in additive manufacturing with Semi-Resolved VOF-DEM (Zekun Wang, Peking University)

ABS037 - DEM study on discharge behavior of ternary cylindrical activated coke particles (Xu Tian, University of Science and Technology Beijing)

ABS162 - Fluidization characteristics of elongated particles (Chuanpeng Zhang, Chinese Academy of Sciences)

ABS007 - Flow Regimes and Secondary Flow Motions in Horizontal Particle-laden Pipe Flows (Xinchen Zhang, University of Adelaide)

15:40-15:50

ABS005 - Melt pool flow and gas bubbles dynamics in selective laser melting of additive manufacturing (Erlei Li, Monash University)

ABS038 - CFD-DEM Study of The Effect of Particle Loading on Energy Loss in a Gas Cyclone (Sijie Dong, Lanzhou University)

ABS010 - Particle-resolved direct numerical simulation of solid sedimentation in liquid (Zhouzun Xie, University of New South Wales)

ABS013 - CFD-DEM study of reacting flow in a packed bed of coke and iron ore in alternative layers (Dan Xu, University of New South Wales)

16:50-16:00

ABS050 - CFD-DEM Simulation Of Wet Milling Process With VOF Model (Changhua Xie, Zhejiang University)

ABS065 - Optimization of Ion Exchanger Charging Structure Based on EDEM-FLUENT Coupling (Tongshan Chai, Wuhan University)

ABS014 - Multi-objective prediction and optimization of separation efficiency in first-stage cyclones of a 10000 T/D clinker burning system (Xinxin Tang, University of New South Wales)

ABS021 - Comparison of Inclusion Particles in Gear Steel Treated by Ca, Mg and Zr (Haseeb Ahmad, University of Queensland)

16:00-16:10

ABS073 - Establishment of a Novel Correlation for Internal Friction Angle Considering the Influence of Particle Shape Based on CFD-DEM Simulations (Guangchao Wei, Northeastern University)

ABS165 - DEM, FEM and Scale Model Experiment for Cement Steady Flow Bin (Xinyu Liu, Monash University)

ABS039 - A multiscale MD-DEM simulation on gold nanospheres (Pan Yang, Western Sydney University)

ABS030 - Pyrolysis of iron coke hot briquette in an industrial scale gas heat carrier pyrolyser: an experimental and numerical combined study (Xiuli Xu, Sinosteel)

16:10-16:20

ABS074 - Numerical study on the Influence of Increasing Pellet Proportion on Burden Distribution (Zhijian Zhao, Beijing University of Science and Technology)

ABS075 - Numerical study on Outside Vapor Deposition Process by Modifying Properties of Carrier Gas (Jun He, Southeast University)

ABS043 - Shock Driven Granular Instability In Two Phase Flow (Jiarui Li, Beijing Institute of Technology)

ABS036 - CFD study of wet burden charging on in-furnace phenomena in an ironmaking blast furnace (Ziguang Zhao, University of New South Wales)

16:20-16:30

ABS077 - CFD-DEM Study on the Fluidization Characteristics of a Gas-Solid Fluidized Bed Containing Ternary Components (Wanbing Qiao, Northeastern University)

ABS079 - Numerical Investigation on the Fluidization Characteristics of Binary Particles in a Supercritical Water Fluidized Bed Reactor under Pulsed Conditions (Yang Wang, Northeastern University)

ABS044 - The effects of physical activity on pollutant particle deposition in the realistic human lung airways (Mizanur Rahman, Western Sydney University)

ABS045 - Numerical investigation on optimal design parameter for powder mixing in a ribbon mixer using the DEM (Yoshiharu Tsugeno, University of Tokyo)

16:30-16:40

ABS078 - On Predicting the Combined Effects of Particle Shape, Incident Angle and Porosity on Momentum and Heat Transfer Between Particles and Fluids (Haishan Miao, Northeastern University)

ABS084 - Vortex characteristics of a gas cyclone determined with different vortex identification methods (Zihui Zhang, Lanzhou University)

ABS056 - Effect of Restitution Coefficient on Granular Temperature and Angle of Repose of Gas-Solid Flow in a Rotating Drum (Rezwana Rahman, Western Sydney University)

ABS055 - Process Model of Vibrating Screen Based on DEM and Machine Learning (S M Arifuzzaman, Western Sydney University)

16:40-16:50

ABS164 - Numerical Modelling of Gas-solid Two-phase Flow in a Plasma Melting Furnace (Zhengzong Huang, Central South University)

ABS087 - Experimental and Numerical Study of Turbine Blades in Different Shapes in Rotational Flow Field (Qinyu Cai, Lanzhou University)

ABS112 - The combined boundary element method and discrete element method for modelling stress distribution and breakage of granular systems with similar particle shapes (Biao Liu, Swansea University)

ABS071 - Particle Flow Regime in an Inclined Rotating Drum (Parag Widhate, Western Sydney University)

16:50-17:00

ABS095 - Three-dimensional Simulation on Pressurized Oxy-fuel Combustion in a 660 MW e Circulation Fluidized Bed (Jinrao Gu, Southeast University)

ABS092 - DEM Investigation of Heat Transfer during Coal Tar Pitch Oxidation in a Rotary Kiln (Liyu Xie, Southeast University)

ABS067 - A novel identification approach for powder mixing mechanisms in industrial mixers (Shuo Li, University of Tokyo)

ABS063 - Online Free Lime Prediction in Cement Manufacturing process with Graph Deep Learning Method (Guangsi Shi, Monash University)

17:00-17:10

ABS097 - Numerical Simulation Study on Coal Combustion and Calcium Carbonate Decomposition in a Full-scale Cement Calciner (Ying Cui, Southeast University)

ABS094 - CFD-DEM Modelling of Single Char Combustion in an Oxy-fuel Fluidized Bed: Heat Transfer Contribution (Guoqing Lian, Southeast University)

ABS057 - A Computational Fluid Dynamics Model Coupled with Ethylene Polymerization Kinetics for Fluidized Bed Polyethylene Reactor (Cai Min, East China University of Science and Technology)

ABS069 - CFD-DEM Study Of The Effect Of Shape of Carrier Particles On API Powder Dispersion (Lunjian Li, University of New South Wales)

17:10-17:20

ABS104 - Numerical simulation study on oxygen permeation membrane separation (Lize Wang, Southeast University)

ABS098 - Molecular Dynamics Simulation Study on the Reaction Mechanism of Pressurized Coal Combustion in O 2 /CO 2 atmosphere under Different Operating Conditions (Yu Qiu, Southeast University)

ABS096 - Research on Vortex Cavitation Characteristics of Oil Suction Port in High Speed External Gear Pump (Yan Qiang, Southeast University)

ABS062 - Assessment of gas injection technology effectiveness for oxygen-enriched blast furnace ironmaking (Jing Li, Monash University)

17:20-17:30

ABS161 - CFD Study on Solid-Liquid Flow of Slurry Electrolysis Stirred Tank (Tingting Lu, University of Science and Technology Beijing)

ABS129 - The Investigation of Wake Characteristics and Drag Correlations for Flow Past Porous Spheres (Likun Ma, Chinese Academy of Sciences)

ABS127 - Design of a new hydrocyclone to achieve high separation efficiency and low energy consumption (Yechen Tang, Monash University)

ABS068 - Water-based nanoparticle suspensions for abrasive machining of brittle solids (Shuiquan Huang, The University of Queensland)

17:30-17:40

ABS049 - Effects of surfactants on the wettability of silica powders: a molecular dynamics study (Yufei Gao, Lanzhou University)

ABS109 - Comparative numerical simulations of reaction-coupled annular and free-bubbling fluidized beds performance (Adefarati Oloruntoba, China University of Petroleum)

ABS023 - Numerical investigation on the flow characteristics in a novel desulfurization reactor with structure optimization (Gong Li, Southeast University)

ABS110 - Study on gas-solid two-phase flow characteristics in elbow pipe based on LES-DPM method (Yuze Li, Xiangtan University

Day 3 (Saturday, 20 November 2021)

 

Session 24

Join

Zoom ID: 818 4986 5905

Password: 408502

(Onsite Room 901)

Chair: Fengxian Fan, Jie Xiao

Session 25

Join

Zoom ID: 851 9941 2317

Password: 210880

(Onsite Room 911)

Chair: Junwu Wang, Yu Guo

Session 26

Join

Zoom ID: 830 6260 3310

Password: 542299

(Onsite Room 905)

Chair: Geoff Wang, Bin Chen

Session 27

Join

Zoom ID: 868 0045 4591

Password: 009201

(Onsite Room 913)

Chair: Qiang Zhou, Yongzhi Zhao

09:00-09:30

Keynote: KYN024 - Machine Learning for Data-driven Mesoscale Modeling of Gas-particle Flows (Zhenghong Luo, Shanghai Jiaotong University)

Keynote: KYN037 - Numerical Investigations on Particle-shape-induced Segregation and Fiber-flexibility-enhanced Clustering (Yu Guo, Zhejiang University)

Keynote: KYN051 - Impact of Process Intensity and Time on Cohesive Particle Coating and Mixing (Rajesh N. Dave, New Jersey Institute of Technology)

Keynote: Mesoscopic Investigation of Liquid Droplets Flow Behaviour in the Packed Bed (Xuefeng Dong, University of Wollongong)

09:30-09:45

Keynote: KYN004 - Recent Development and Application of Multiscale Models of the Mono-disperse Droplet Spray Dryer (Jie Xiao, Soochow University)

Keynote: KYN016 - Towards Full-Scale Numerical Modelling of Particles and Fluids under Complex and Extreme Conditions (Hao Zhang, Northeastern University)

Keynote: KYN006 - Transition from Particulate to Aggregative Fluidization: Models and Simulations of Sub- and Sup-critical Fluid Fluidized Beds (Huilin Lu, Harbin Institute of Technology)

ABS064 - DEM modelling of particle breakage during high pressure roll grinding (Dazhao Gou, University of New South Wales)

09:45-10:00

ABS052 - A Two-Fluid Model for Funnel Flow in Quasi-2D Flat-Bottom Moving Bed (Chengshan Wang, Chongqing University)

10:00-10:15

Keynote: AI Empowers the Whole Processes of Scientific Research -- the Online Collaborative Cloud Platform for Scientific Research (Yunfeng Li, CNPIEC KEXIN LTD)

ABS022 - A Capillary Force Model Considering Convex and Concave Liquid Bridge and Its Application in Wet Particle System (Fei Xiao, Southwest Oil & Gas Field Company, PetroChina)

ABS059 - CFD Study of Oxygen-Enriched Pulverized Coal Combustion in an Ironmaking Blast Furnace (Yiran Liu, University of new South Wales)

ABS060 - Investigating the Particulate and Gaseous Pollutants During Utilization of Biomass for Iron Ore Sintering (Xiaoteng Zhou, Macquarie University)

10:15-10:30

ABS035 - Septoplasty Effect on the Enhancement of Airflow Distribution and Particle Deposition in Nasal Cavity: A Numerical Study (Xiaole Chen, Nanjing Normal University)

ABS012 - Particle-scale modelling of phase changes in selective laser melting (Shuai Wang, University of New South Wales)

ABS113 - Optimization of spatial gesture of pump truck boom conveying pipe using CFD-DEM method and interior-point algorithm (Shengqiang Jiang, Xiangtan University)

10:30-10:45

ABS147 - The particle-wall collision of disk-shaped adhesive particles: a numerical study by finite element method (Yiyang Zhang, Tsinghua University)

ABS025 - DEM study of cubical particle clogging behavior in a packed bed (Heng Zhou, University of Science & Technology Beijing)

ABS108 - Influence of particle aspect ratio on wave propagation in granular (Xihua Chu, Wuhan University)

ABS166 - Directional Growth of MgO-Fe(III) Nanosheets from Solid Waste for Catalytic Hydrogen Production in Water Gas Shift Reaction (Baiqian Dai, Monash University)

 

Session 28

Join

Zoom ID: 821 9299 2675

Password: 416096

(Onsite Room 901)

Chair: Malin Liu, Yixiang Gan

Session 29

Join

Zoom ID: 820 6921 0884

Password: 340230

(Onsite Room 911)

Chair: Zhenbo Tong, Hao Zhang

Session 30

Join

Zoom ID: 875 4128 2658

Password: 986041

(Onsite Room 905)

Chair: Haiping Zhu, Qijun Zheng

Session 31

Join

Zoom ID: 825 2807 8969

Password: 219886

(Onsite Room 913)

Chair: Xiaoping Guan, Vladimir Strezov

11:00-11:30

Keynote: KYN020 - Application of co-simulation in modelling mineral processing plants – an overview (Wei Chen, Bradken)

Keynote: KYN007 - Data-Driven Modeling and Analysis of Dense Gas-Solid Flow (Junwu Wang, University of Chinese Academy of Sciences)

Keynote: KYN034 - Numerical Determination of Coal Permeability with the Lattice Boltzmann Method (LBM) (Geoff Wang, University of Queensland)

Keynote: KYN043 - Chute wear in granular materials transfer system by DEM simulation (Yuanqiang Tan, Huaqiao University)

11:30-12:00

Keynote: Bin Chen - Numerical Simulation of Cryogen Spray Cooling and Frostbite Prediction with Application in the Laser Dermatosis (Bin Chen, Xi’an Jiaotong University)

Keynote: KYN011 - Turbulent Heat Transfer of Supercritical Fluids: Fundamentals and Modeling Theory (Bofeng Bai, Xi’an Jiaotong University)

Keynote: KYN029 - Relaxation of Powders Beds Under Stress: New Experiments and Review on Modelling-Simulation (Alain De Ryck, IMT Mines Albi)

Keynote: KYN046 – Contribution of iron and steelmaking facilities to atmospheric particles in Australia and China (Vladimir Strezov, Macquarie University)

12:00-12:15

ABS132 - Large Eddy Simulation of Discrete Particle Distribution Characteristics in Turbulent Exhaust flow of Aircraft (Wenjing Sun, Nanjing University of Aeronautics and Astronautics)

ABS008 - Optimisation of ironmaking blast furnace operations using an integrated mathematical model (Lingling Liu, Monash University)

ABS103 - Modelling pressurized oxy-fuel combustion of coal and biomass mixtures in a fluidized bed (Qinwen Liu, Southeast University)

ABS080 - CFD study of pulverized coal combustion in a dynamic raceway of an ironmaking blast furnace: effect of blast operating conditions (Yuting Zhuo, University of New South Wales)

12:15-12:30

ABS148 - Numerical investigation of the effect of hydrocyclone feed inlet configurations and particle size distributions on the multiphase flow and performance (Li Ji, Shandong University)

ABS114 - Numerical Simulation of the Unsteady Burden Charging Process with a Quasi-transient Blast Furnace Process Model (Lulu Jiao, Southeast University - Monash University Joint Research Institute)

ABS106 - Local solids residence time distributions in different gas-solids fluidization regimes (Hongliang Xiao, China University of Petroleum)

ABS102 - Central coke charging and its effect on coke collapse at the throat of blast furnace by DEM simulation (Mingyin Kou, University of Science and Technology Beijing)

 

Session 32

Join

Zoom ID: 829 9612 5859

Password: 717504

(Onsite Room 901)

Chair: Bofeng Bai, Liejin Guo

13:30-14:15

Plenary: Professor Stefan Luding

Particle meso-scale models for varying pressure and temperature

14:15-15:00

Plenary: Professor Wei Ge

Discrete particle simulation of industrial-scale reactors: towards virtual process engineering

15:00-15:15

Award Presentation, Wrap-Up and Conclusion

Call for Papers

Abstract submission – download template here

Poster submission - example available here

Participants are encouraged to submit their full paper after the symposium.

For all enquiries and submission of abstracts, please send to ARC.Hub.Secretariat@monash.edu

Committee

International Scientific Committee

Chairmen

  • Prof Jinghai Li (Chinese Academy of Sciences, China), Co-chair
  • Prof Aibing Yu (Monash University, Australia), Co-chair

Members

  • Dr John Burgess (Monash University, Australia)
  • Prof Xiaodong Chen (Suzhou University, China)
  • Prof Jennifer Curtis (University of California at Davis, USA)
  • Prof Raj Dave (New Jersey Institute of Technology, USA)
  • Prof Alain De Ryck (IMT Mines Albi, France)
  • Prof Itai Einav (University of Sydney, Australia)
  • Dr Tim Evans (Rio Tinto, Australia)
  • Prof Liang-Shi Fan (Ohio State University, USA)
  • Prof David Fletcher (University of Sydney, Australia)
  • Prof Rodney Fox (Iowa State University, USA)
  • Prof Wei Ge (Chinese Academy of Sciences, China)
  • Prof Liejin Guo (Xi’an Jiaotong University, China)
  • Prof Rod Guthrie (McGill University, Canada)
  • Prof Karen Hapgood (Deakin University, Australia)
  • Prof Stefan Heinrich (Hamburg University of Technology, Germany)
  • Prof Masayuki Horio (Tokyo University of Agriculture & Technology, Japan)
  • Prof Hidenhiro Kamiya (Tokyo University of Agriculture and Technology, Japan)
  • Prof JAM Kuipers (Eindhoven University of Technology, Netherlands)
  • Prof Jim Litster (University of Sheffield, UK)
  • Prof Stefan Luding (Twente University of Technology, Netherlands)
  • Dr Xiaoming Mao (Baosteel, China)
  • Prof Jin Ooi (University of Edinburgh, UK)
  • Dr Renhu Pan (Longking, China)
  • Prof Tingsheng Qiu (Jiangxi University of Science and Technology, China)
  • Prof Murray Rudman (Monash University, Australia)
  • Dr Phil Schwarz (CSIRO, Australia)
  • Prof Toshitsugu Tanaka (Osaka University, Japan)
  • Prof Antoinette Tordesillas (University of Melbourne, Australia)
  • Prof Fei Wei (Tsinghua University, China)
  • Prof Richard Williams (Herriot Watt University, UK)
  • Dr. Peter Witt (CSIRO, Australia)
  • Prof Charley Wu (University of Surrey, UK)
  • Prof Wenqi Zhong (Southeast University, China)
  • Prof Paul Zulli (University of Wollongong, Australia)

Organising Committee

Chairmen

  • Prof Aibing Yu (Monash University, Australia)
  • Prof Liejin Guo (Xi’an Jiaotong University, China)

Members

  • Prof Xizhong An (Northeastern University, China)
  • Prof Bofeng Bai (Xi’an Jiaotong Univeristy, China)
  • Dr Jiang Chen (JITRI Institute for Process Modelling and Optimisation, China)
  • Dr Guojian Cheng (JITRI Institute for Process Modelling and Optimisation, China)
  • A/Prof Kejun Dong (Western Sydney University, Australia)
  • A/Prof Dianyu E (Jiangxi University of Science and Technology, China)
  • Dr Yi He (SEU-Monash Joint Research Institute, China)
  • Dr Qinfu Hou (Monash University, Australia)
  • Dr Lulu Jiao (SEU-Monash Joint Research Institute, China)
  • Dr Shibo Kuang (Monash University, Australia)
  • Dr Minsu Liu (SEU-Monash Joint Research Institute, China)
  • Prof Zhenbo Tong (Southeast University, China)
  • Prof Geoff Wang (University of Queensland, Australia)
  • Prof Bo Wang (Lanzhou University, China)
  • A/Prof Shixian Xiong (Jiangxi University of Science and Technology, China)
  • Prof Ning Yang (Chinese Academy of Sciences, China)
  • A/Prof Runyu Yang (The University of New South Wales, Australia)
  • Dr Liuyimei Yang (SEU-Monash Joint Research Institute, China)
  • A/Prof Hao Zhang (Northeastern University, China)
  • Dr Qijun Zheng (SEU-Monash Joint Research Institute, China)
  • Prof Wenqi Zhong (Southeast University, China)
  • Prof Zongyan Zhou (Jiangxi University of Science and Technology, China)
  • A/Prof Ruiping Zou (Monash University, Australia)

Conference Secretariat

  • Dr Zongyan Zhou, SIMPAS, Monash University, Australia, email: Zongyan.Zhou@monash.edu
  • Dr Teck Ching, SIMPAS, Monash University, Australia, email: teck.ching1@monash.edu

Invited Speakers

Plenary Speakers

Xiaodong Chen
Prof Xiaodong Chen
Soochow University
Jennifer Curtis
Prof Jennifer Sinclair Curtis
University of California
Liang-Shih Fan
Prof Liang-Shih Fan
Ohio State University
Wei Ge
Prof Wei Ge
Chinese Academy of Sciences
Lei Jiang
Prof Lei Jiang
BeiHang University
Stefan Luding
Prof Stefan Luding
University of Twente
Charley Wu
Prof Chuan-Yu (Charley) Wu
University of Surrey
dongyuan zhao
Prof Dongyuan Zhao
Fudan University

Keynote Speakers

xizhong an
Prof Xizhong An
Northeastern University
bofeng bai
Prof Bofeng Bai
Xi'an Jiaotong University
bin chen
bin chenProf Bin Chen
Xi'an Jiaotong University
wei chen
wei chenDr Wei Chen
Bradken Resources
yuan cheng
Dr Yuan Cheng
Monash-SEU Joint Research Institute
rajesh dave
Prof Rajesh N. Dave
New Jersey Institute of Technology
alain de ryck
Prof Alain De Ryck
IMT Mines Albi
kejun dong
A/Prof Kejun Dong
Western Sydney University
xuefeng dong
Dr Xuefeng Dong
University of Wollongong
itai einav
Prof Itai Einav
The University of Sydney
tim evans
Dr Tim Evans
RioTinto
fengxian fan
Prof Fengxian Fan
University of Shanghai for Science and Technology
yuntian feng
Prof Yuntian Feng
Swansea University
yuqing feng
Dr Yuqing Feng
CSIRO Mineral Resources
yixiang ganyixiang gan
A/Prof Yixiang Gan
The University of Sydney
yu guo
Prof Yu Guo
Zhejiang University
karen hapgood
Prof Karen Hapgood
Deakin University
ruoyu hong
Prof Ruoyu Hong
Fuzhou University
qinfu hou
Dr Qinfu Hou
Monash University
shunying ji
Prof Shunying Ji
Dalian University of Technology
xuchuan jiang
Prof Xuchuan Jiang
Jinan University
yijiao jiang
A/Prof Yijiao Jiang
Macquarie University
hidehiro kamiya
Prof Hidehiro Kamiya
Tokyo University of Agriculture and Technology
shibo kuang
Dr Shibo Kuang
Monash University
shuiqing lishuiqing li
Prof Shuiqing Li
Tsinghua University
yunfeng li
Dr Yunfeng Li
CNPIEC KEXIN LTD
malin liu
Prof Malin Liu
Tsinghua University
moubin liu
Prof Moubin Liu
Peking University
yan liu
Prof Yan Liu
Northeastern University
kun luo
Prof Kun Luo
Zhejiang University
zhenghong luo
Prof Zhenghong Luo
Shanghai Jiao Tong University
huilin lu
Prof Huilin Lu
Harbin Institute of Technology
renhu pan
Dr Renhu Pan
Fujian Longking
david pinson
Dr David Pinson
BlueScope Steel
mikio sakai
Prof Mikio Sakai
The University of Tokyo
cordelia selomulya
Prof Cordelia Selomulya
University of New South Wales
yansong shen
A/Prof Yansong Shen
University of New South Wales
vladimir strezov
Prof Vladimir Strezov
Macquarie University
yuanqiang tan
Prof Yuanqiang Tan
Huaqiao University
zhenbo tong
Prof Zhenbo Tong
Southeast University
Antoinette Tordesillas
Prof Antoinette Tordesillas
University of Melbourne
junwu wang
Prof Junwu Wang
Chinese Academy of Sciences
limin wang
Prof Limin Wang
Chinese Academy of Sciences
geoff wang
Prof Geoff Wang
University of Queensland
jie xiao
Prof Jie Xiao
Soochow University
ning yang
Prof Ning Yang
Chinese Academy of Sciences
runyu yang
A/Prof Runyu Yang
University of New South Wales
mao ye
Prof Mao Ye
Chinese Academy of Sciences
jianglong yu
Prof Jianglong Yu
Monash Suzhou Research Institute
hao zhang
Prof Hao Zhang
Northeastern University
yongzhi zhao
Prof Yongzhi Zhao
Zhejiang University
jidong zhao
Prof Jidong Zhao
Hong Kong University of Science and Technology
qijun zheng
Dr Qijun Zheng
Monash University
wenqi zhong
Prof Wenqi Zhong
Southeast University
qiang zhou
Prof Qiang Zhou
Xi’an Jiaotong University
zongyan zhou
Prof Zongyan Zhou
Jiangxi University of Science and Technology
haiping zhu
A/Prof Haiping Zhu
Western Sydney University

Key dates

Abstract submission: CPT-2021 abstracts should be submitted to arc.hub.secretariat@monash.edu before 30 September 2021 (now extended to 15 Oct 2021). A submission should include an abstract and short biography (of its presenter), up to two A4 pages and prepared using MS Words.

Notification of abstract acceptance: before 31 October 2021

Close of registration: 14 Nov 2021

Symposium dates: 17 - 21 Nov, 2021 (registration/reception on 17 Nov; meeting on 18-21 Nov)

Any queries: Email ARC.Hub.Secretariat@monash.edu

Author Area

Instructions for extended Abstract Submission

This symposium will include plenary, keynote, oral and poster presentations, and interactions between the industry and academics. Authors are to send the extended abstract to the scientific committee for review and approval. Participants are encouraged to submit their full papers after the symposium, and a special issue will be formally published in Powder Technology in 2022 (a deadline is to be determined).

Please submit your extended abstract to ARC.Hub.Secretariat@monash.edu by 30 September 2021 (now extended to 15 Oct 2021)

Template for abstract submission available here

Instructions for Oral Presentations

  • English is the official language of the conference and for all presentations.
  • The time allotted is 45 minutes (including 5 minutes for discussion) for plenary presentations, 30 minutes (including 5 minutes for discussion) for keynote presentations, 15 minutes (including about 3 minutes for discussion) for the regular presentations, and 10 minutes (including 2 minutes for discussion) for student presentations. As we have a tight timetable, the time will be strictly adhered to.
  • All presentations are given in Microsoft PowerPoint or PDF format. A computer and data projector will be provided.
  • Be sure that your presentation is uploaded to the computer well before your presentation and definitely no later than the session break before your scheduled presentation. Please also ensure that your presentation is run properly.
  • Please inform your session chair during the session break of your personal information.

Instructions for Poster Presentations

  • A poster space of A0-portait size (1.2m height x 0.85m width) will be provided.
  • Posters should be set up at the beginning of the day of their scheduled time and removed at the end of the day. Posters can be affixed to the panels using tape or push pins which will be provided.
  • The allocated poster time is associated with social hours. During the poster time, authors are expected to be at their posters to respond to questions from the audience.
  • A couple of conference awards for the best posters will be presented (with certificate & cash prize). So, worthwhile to create a sublime CPT 2021 poster!
  • Poster example available here

Accommodation

Delegates please make your own accommodation arrangements.

Quotations are subject to change, pending negotiation.

Proposed hotel information:

  1. Sheraton Hotel★★★★★www. Marriott.com.cn

    福朋喜来登酒店

    Address: 8 Yueliangwan Rd, Wuzhong District, Suzhou, Jiangsu, China

    江苏省苏州市工业园区独墅湖高教区月亮湾路8号

    Phone: +86 512-67997999

    From ¥550/person/night

  2. Worldhotel★★★★★http://hotel.elong.com/

    独墅湖世尊酒店

    Address: 299 Qiyue St, Wuzhong District, Suzhou, Jiangsu, China

    江苏省苏州市工业园区独墅湖高教区启月街299号

    Phone: +86 0512-69568888

    Sales Manager Phone: 13912637353

    Individual guest price ¥600person/night, breakfast included (valid until the end of 2021)

  3. Oakwood International Hotel Suzhou ★★★★https://www.oakwood.com

    奥克伍德国际酒店公寓

    Address: 6, Yueliangwan Road, Suzhou Industrial Park

    江苏省苏州市工业园区独墅湖高教区月亮湾路6号

    Phone: +86 512-69990099

    From ¥450/person/night

  4. Xi'an Jiaotong-Liverpool International Conference Center ★★★★http://jiudian.0335info.com/12688/room.html

    西交利物浦国际会议中心

    Address: 99, Ren'ai Road, Dushu Lake Higher Education District, Suzhou Industrial Park

    江苏省苏州市工业园区独墅湖高教区仁爱路99号

    Phone: +86 512-86665555

    From ¥400/person/night

  5. Orange Hotel★★★https://www.huazhu.com/Juzi

    桔子酒店

    Address: 366, Wenhui Plaza, Linquan Street, Dushu Lake Higher Education District, Suzhou Industrial Park

    江苏省苏州市工业园区独墅湖高教区林泉街文荟广场366号

    Phone: +86 512-69562588

    From ¥400/person/night

  6. Jinjiang Fashion Inn ★★★https://hotel.bestwehotel.com/HotelSearch/

    锦江之星风尚

    Address: 8, Xuetang Street, Dushu Lake Higher Education Zone, Suzhou Industrial Park

    江苏省苏州市工业园区独墅湖高教区雪堂街8号

    Phone: +86 512-86861010

    From ¥329/person/night, breakfast included

  7. Green Tree Inn ★★https://www.998.com/shtml/99/en/index.html

    格林豪泰商务酒店

    Address: 598, Linquan Street, Dushu Lake Higher Education Zone, Jinji Lake, Suzhou Industrial Park

    江苏省苏州市工业园区独墅湖高教区林泉街598号

    Phone: +86 512-62550866

    From ¥290/person/night

Registration

Registration fee:

Registration FeePhysicalVirtual
RegularRMB4000 (AUD800)RMB2000 (AUD400)
StudentRMB3500 (AUD700)RMB1500 (AUD300)
Plenary/Keynote Speakers00

Please follow this link for registration (available in both AUD and RMB).

Last date for Regular Registration: Sunday 14 Nov 2021

Late registration fee including on-site Registration : +¥500 (extra)

Instructions for payment in AUD (for overseas attendees) can be found here.

Symposium Sponsors

Longking
      Zhongtu Kexin Digital Technology (Beijing) Co., Ltd
yanghe group
elsevier

Contact

SIMPAS CPT HUB Monash University

General Enquiry
ARC.Hub.Secretariat@monash.edu

Postal Address:
ARC Hub for Computational Particle Technology

Department of Chemical Engineering

Monash University, Clayton, Victoria, Australia 3800