Publication

Peer-reviewed book chapters

  1. Z. Qi, S.B. Kuang, L.W. Rong, K.J. Dong, A.B. Yu, `General drag correlations for particle-fluid system`. In V. R. Prasad, V. Silva, & J. Cardoso (Eds.), Boundary Layer Flows – Modelling, Computation, and Applications of Laminar, Turbulent Incompressible and Compressible Flows. IntechOpen, 2022. View paper

Peer-reviewed Journal papers

2026

  1. A. Alsuwaidi, J.N. Salvilla, J. Rong, M. Atef, R.Z. Yang, Q.Q. Liu, S.B. Kuang, L. Zhang*, 'Fast prediction of FCC regenerator temperature fields using digital – twin based on convolutional autoencoder dimensionality reduction and machine learning', CHEM ENG J ADV, (2026). View paper
  2. K.L. Chen, M.X. Wu, T. Evans, S. Song. Z.Y. Zhou, Q. Wang, A.B. Yu, S.B. Kuang*, ‘Numerical Analysis of the Reactivity of Raw Materials Used in Blast Furnace Ironmaking’,  METALL AND MATERI TRANS B, (2026),. View paper
  3. Q. Zheng, Y.J. Tian*, H. Luo, W. Wang*, F. Li, B.N. Lu, Q.J. Zheng, S.B. Kuang*, ‘A new enabling multiscale model for low-carbon cement pre-calciners fueled by biomass ‘, ENERGY, 357 (2026), 141357. View paper.
  4. Y. Fei, M. Fazli, S.B. Kuang*, X.P. Guan, T. Evans, S. Song, A.B. Yu, N. Yang*,`Numerical study of high-H2 operation and gas injection strategies to enhance shaft furnace performance for low-carbon ironmaking`, INT J HYDROGEN ENERGY 241 (2026), 155480. View paper
  5. Y. Fei, S.B. Kuang*, X.P. Guan, T. Evans, S. Song, A.B. Yu, N. Yang*,`Revealing contradictory reduction behavior in shaft furnaces at increasing H2 contents: Combined roles of thermodynamic equilibrium differences and gas flow rate`, Fuel 424 (2026), 139374. View paper
  6. D.R. Dias, D.P. de Sa da Silva, D. de Oliveira Silva, L.G.M. Vieira*, S.B. Kuang*, `Advances, limitations, and research opportunities in indirect evaporative cooling systems: a systematic and critical literature review`, APPL THERM ENG, 297 (2026), 130863. View paper
  7. Y. Zhang,  Q.J. Zheng*, S.B. Kuang, M.S. Liu, Z. Wang, A.B. Yu, F. Gu, X. Tian. `Unveiling droplet size evolution in aerosol jet printing processing via numerical simulation. Virtual and Physical Prototyping`, VIRTUAL PHYS PROTOTYPING, 21 (2026), e2665902. View paper
  8. C. Tan, D.Y. E*, Y.H. Zhang*, Y.C. Chen, Z.F. Su, J.X. Cui, R.P. Zou, S.B. Kuang, `Numerical and experimental study on effect of ratio of overflow pipe outer diameter to cylindrical section diameter on hydrocyclone performance`, PARTICUOLOGY, 113 (2026), 189-198. View paper
  9. Z.H. Sun, X.Y. Wang, S.B. Kuang, J.N. Song*, C. de la Fuente-Nunez*, `From Generation to Validation: Deep Generative Models for Antimicrobial Peptide Discovery`, CURR OPIN CHEM BIOL, 93 (2026), 102685. View paper
  10. F.Y. Huang, R.P. Zhou, A.B. Yu, T. Evans, S. Song, S.B. Kuang*, `CFD-DEM investigation and analysis of non-spherical particles tribocharging in a horizontal-bend-vertical pipe`, INT J MULTIPHAS FLOW, 199 (2026), 105692. View paper
  11. W.B. Wu, K.L. Chen, A.B. Yu, S.B. Kuang*, `Multi-Objective Optimization Model for Blast Furnace Ironmaking with Consideration of Internal States`, METALL AND MATERI TRANS B, 57 (2026), 3246–3270. View paper
  12. D.Y. E*, Y.H. Zhang, C. Tan*, H.W. Hu, J.X. Cui, C.F. Yuan, Z.Y. Zhou, C.B. Wu, R.P. Zou, S.B. Kuang, A.B. Yu , `An adaptive multi-objective optimization and control framework for hydrocyclone operation under dynamic particle-size distributions`, RESULTS ENG, 29 (2026), 109026. View paper
  13. Y.Y. Rao, P. Yuan, L. Ji*, X.N. Wu, H.H. Zhang, K.W. Chu, S.B. Kuang, `The application of a novel mini-filtering hydrocyclone in improving underflow concentration ratio`, J WATER PROCESS ENG, 81 (2026), 109338. View paper
  14. Y.D. Zhao, C.H. Li, S. Liu, X.J. Liu, F.M. Li, D.Y. E*, S.B. Kuang*, `A multimodal data fusion machine learning model for recognition top gas flow distribution patterns in blast furnaces`, J IRON STEEL RES INT, (2026). View paper.
  15. Y.C. Liu, L.L.Jiao,  A.B. Yu, S.B. Kuang*, `Numerical simulation of blast furnace ironmaking process with consideration of silica reduction`, METALL AND MATERI TRANS B, 57 (2026), 642-663. View paper.
  16. D. Thiemsakul, S.B. Kuang, W. Sukmas, E. Bumrungthaichaichan, K. Korkerd, R. Piemjaiswang, P. Piumsomboon, B. Chalermsinsuwan*, `Effect of Hydrocyclone Size on Microplastics Separation: A Computational Fluid Dynamics Investigation`, S AFR J CHEM ENG, 55 (2026), 100-110. View paper.
  17. Y. Fei, S.B. Kuang*, X.P. Guan, A.B. Yu, T. Evans, S. Song, N. Yang*, `Modeling industrial shaft furnaces and investigation of CH4-related side reactions`, APPL THERM ENG, 282 (2026), 128835. View paper
  18. S. Liu, Q.Q. Li, Q. Ye, Z.W. Zhao, D.Y. E*, S.B. Kuang*, `An improved semisupervised learning for top gas flow state classification to reduce emission and improve efficiency in ironmaking blast furnaces`, INT J MINER METALL MATER, 33 (2026), 204-216. View paper.
  19. D.Y. E*, Y.H. Zhang, H.W. Hu, G.T. Xu,L. Liu, J.X. Cui, C. Tan*, R.P. Zou, S.B. Kuang, `CFD data-driven CNN-LSTM for fast prediction of instantaneous flow characteristics in hydrocyclones`, MINER ENG, 235 (2026), 109814. View paper
  20. Q. Ye, Y.C. Tang, S.B. Kuang*, P.B. Duan, T. Evans, S. Song, R.P. Zou, A.B. Yu, `Design and optimize a novel hydrocyclone by combining mechanistic and data-driven models`, POWDER TECHNOL, 468 (2026), 121663. View paper
  21. J. Li, S.B. Kuang*, T. Evans; S. Song; A.B.  Yu*, `Hydrogen injection in blast furnaces: Effects of hydrogen injection temperature under various injection conditions`, FUEL, 405 (2026), 136667.View paper

2025

  1. W.B. Wu, Y.H. Zhang, C. Tan, J.X. Cui, C.F. Yuan, Z.Y. Zhou, C.B. Wu, R.P. Zou, D.Y. E*, S.B. Kuang*, `A combined machine learning and mechanistic model for quickly predicting three-dimensional inner states of hydrocyclones`, SEP PURIF TECHNOL, 379 (2025), 135046. View paper.
  2. C.C. Lin, W.Y. Lee, Y.C. Chung* and S.B. Kuang, ‘Fluid-immersed granular avalanche: coupled computational fluid dynamics and discrete element method modelling, experimental validation and internal flow characterisation’, PHYS FLUIDS, 37 (2025), 093322. View paper.
  3. Q. Zheng, Y.J. Tian*, W. Wang*, F. Li, B.N. Lu, Q.J. Zheng, S.B. Kuang*, ‘Numerical investigation of intra-particle temperature gradient effects on biomass pyrolyzer by sub-particle scale modeling’, CHEM ENG J, 521 (2025), 166604. View paper.
  4. Y. Zou, S.B. Kuang*, Y.L. Wu, A.B. Yu*, ‘Particle-pore-scale modelling and analysis of heat transfer in packed beds: effects of bed porosity and pore structure’, APPL THERM ENG, 279 (2025), 127601. View paper.
  5. L.L. Jiao*, H.Q. Nie, S.B. Kuang, J.L. Zhang, A.B. Yu, `Numerical investigation of hearth gas injection operation in full oxygen furnace ironmaking`, METALL AND MATERI TRANS B, 56 (2025), 5800–5820. View paper
  6. A. Alsuwaidi*,  S. Yang, A.B. Appiagyei, J. N. V. Salvilla, N. Ahmad, H. Song, Q. Liu, F. Ren, Z. Chen, S.B. Kuang, L.A. Zhang, `Integrated CFD and Experimental Analysis of Coke Oxidation in FCC Catalyst Regeneration Under O2/N2 and O2/CO2`, PROCESSES, 13(2205), 1718. View paper.
  7. Y.C. Liu, S.B. Kuang*, L.L.Jiao*,  A.B. Yu, `Numerical analysis of liquid flow in ironmaking blast furnace (BF) and its impact on BF performance`, POWDER TECHNOL, 462 (2025), 121110. View paper
  8. Y.C. Liu, S.B. Kuang*, L.L.Jiao,  A.B. Yu*, `Numerical modeling of titanium behavior in the blast furnace ironmaking process`, METALL AND MATERI TRANS B, 56 (2025), 3730–3748. View paper
  9. J.J. Li, L.L.Jiao*, S.B. Kuang*, R.P. Zou, W.Q. Zhong, A.B. Yu*, `How to optimize the blast furnace profiles for maximum energy efficiency`, METALL AND MATERI TRANS B, 56 (2025), 4125–4147. View paper
  10. P.J. Capdeville, S.B. Kuang*, T. Evans, S. Song, A.B. Yu, ` GPU-DEM study of the flow and energy dissipation behaviors of burden materials in a full bell-less blast furnace charging system`, POWDER TECHNOL,  459 (2025), 121035. View paper
  11. Z.Y. Zhu, P. Zhou, WK Tan, Z. Chen*, S.B. Kuang*, ‘CFD‒PBM modeling of gas‒particle reactive flow and particle aggregation in the flash smelting furnace’, INT J MULTIPHAS FLOW, 188 (2025), 105233. View paper.
  12. D.Y. E*, H.W. Hu, Q. Ye, C. Tan*, J.X. Cui, Z.Y. Zhou, R.P. Zou, A.B. Yu, S.B. Kuang*, ‘Multi-objective optimization of hydrocyclones inlet configurations for improving separation performance’, POWDER TECHNOL, 456 (2025), 120772. View paper
  13. D.Y. E*, H.W. Hu, C. Tan*, Y.H. Zhang, G.T. Xu, J.X. Cui, R.P. Zou, A.B. Yu, S.B. Kuang, `Numerical study of the effect of cylinder–to–cone ratio on the classification performance in hydrocyclones`, POWDER TECHNOL, 454 (2025), 120736. View paper
  14. F.Y. Huang, S.B. Kuang*, R.P. Zhou, A.B. Yu, `Characterization of non-spherical particle tribocharging during horizontal pneumatic conveying`, APPL MATH MODEL, 140 (2025), 115894. View paper.
  15. H.Y. Wang*, Z. Tan, S.B. Kuang, A.B. Yu*, `DDPM investigation on centrifugal slurry pump with inlet and sideline configuration retrofit`, POWDER TECHNOL, 449 (2025), 120386. View paper
  16. W.Z. Zhang*, S.B. Kuang, Z.H. Chai, and B.C. Shi, `Thirteen-velocity three-dimensional multiple-relaxation-time lattice Boltzmann model for incompressible Navier-Stokes equations`, ADV APPL MATH MECH, 17 (2025), 1037-1062. View paper

2024

  1. L. Huang, R.Y. Liu, Q.H. Miao, R.P. Zou, H.S, Jiang*, C.L. Duan*, S.B. Kuang, ‘Dynamic characterization of the flow field of air classifier disturbed structures and application to efficient separation of fly ash’, ENVIRON CHEM ENG, 12 (2024), 114706. View paper.
  2. Z.Y. Zhu, P. Zhou, Z. Chen*, D.L. Wu, S.B. Kuang*, `CFD‒DEM modeling of particle segregation behavior in a simulated flash smelting furnace`, POWDER TECHNOL, 448 (2024), 120310. View paper.
  3. D.Y. E*, C. Tan, Q. Ye, J.X. Cui, Z.Y. Zhou, R.P. Zou, A.B. Yu ,S.B. Kuang*, `An optimization framework for achieving optimal hydrocyclone’s performance aligning with decision-makers’ preferences`, POWDER TECHNOL, 448 (2024), 120233. View paper
  4. H.Y. Wang, F.Y. Huang, M. Fazli, S.B. Kuang*, A.B. Yu*, `CFD-DEM investigation of centrifugal slurry pump with polydisperse particle feeds`, POWDER TECHNOL, 447 (2024), 120204. View paper
  5. Y.E Tang, C. Liu, S.B. Kuang, Q.Q. Liu, Z.Y. Chen, H.T. Song, B. Su, J.L. Yu, L.A. Zhang, B.Q. Dai*, `CFD modeling investigations of oxy-fuel combustion application in an industrial-scale FCC regenerator`, J ENERGY INST, 117 (2024), 101796. View paper
  6. W.B. Wu, S.B. Kuang*, L.L. Jiao, A.B. Yu, `A machine learning model for quickly predicting the inner states of ironmaking blast furnaces`, POWDER TECHNOL, 445 (2024), 120137. View paper
  7. C. Chang, Q.J. Zheng, D.B. Xu, Y. Wang*, H. Su, S.B. Kuang*, `A scalable extraction column utilizing discrete liquid films for lithium recovery from salt lake brines`, ENVIRON CHEM ENG, 12 (2024), 113706. View paper
  8. J.J. Li, L.L. Jiao*, S.B. Kuang, R.P. Zou , W.Q. Zhong, A.B. Yu*, `Numerical investigation of the coupled effect of H/D ratio and effective volume on optimized blast furnace profile `, METALL AND MATERI TRANS B, 55 (2024), 3825–3847. View paper.
  9. C. Tan, H.W. Hu, Q. Ye, D.Y. E*, J.X. Cui, Z.Y. Zhou, S.B. Kuang*, R.P. Zou, A.B. Yu, `Multi-objective optimization of hydrocyclones using meta-heuristic algorithms and preference-informed decision-making`, POWDER TECHNOL, 444 (2024), 120050. View paper
  10. Q.H. Miao, Y.D. Cao, W.H. Zhu, P. Huang*, L. Huang, A.B. Yu, S.B. Kuang, `Segregation flow behavior of polydisperse particle mixture with skewed distribution in a rotating drum`, POWDER TECHNOL, 444 (2024), 120041. View paper
  11. L.L. Jiao*, XY Zhang, S.B. Kuang, J.J. Li, A.B. Yu*, `Numerical investigation of particle size on the performance of ironmaking blast furnace`, METALL AND MATERI TRANS B, 55 (2024), 3387–3406. View paper
  12. Z.Y. Zhu, P. Zhou, Z. Chen*, Z.M. Xiao*, D.L. Wu, S.B. Kuang, `Modelling and analysis on the segregation of copper concentrate particles in the feeding system of flash smelting process`, POWDER TECHNOL, 443 (2024), 119898. View paper
  13. M. Fazli*, M. Rudman, S.B. Kuang*, A. Chryss, `The effect of shear-induced segregation on bidisperse suspension settling`, POWDER TECHNOL, 442 (2024), 119881. View paper
  14. L.L. Jiao*, H.Q. Nie, S.B. Kuang, J.J. Li, A.B. Yu*, `Numerical simulation and analysis of oxygen blast furnace under different injection conditions`, FUEL, 369 (2024), 131726. View paper
  15. F.Y. Huang, S.B. Kuang*, N.I. Ismail, R.P. Zhou, A.B. Yu, `Modeling and analysis of particle behavior in fluidized bed bioreactors during non-Newtonian sewage treatment`, J WATER PROCESS ENG, 60 (2024), 105203. View paper.
  16. D.Y. E*, G.T. Xu, J.X. Cui, Q. Ye, R.P. Zou, A.B. Yu, S.B. Kuang*, `Prediction of instantaneous flow characteristics of hydrocyclone with long short-term memory network based on computational fluid dynamics data`, POWDER TECHNOL, 439 (2024), 119668. View paper.
  17. P. Yuan, J.G. Yu, L.Q. He,  L. Ji*,  X.J. Wang*, K.W. Chu, S.B. Kuang, `Comprehensive analysis of Chinese hamster ovary cell viability loss in mini-hydrocyclones`, POWDER TECHNOL, 438 (2024), 119603. View paper.
  18. M. Fazli*, M. Rudman, S.B. Kuang, A. Chryss, `Predicting bidisperse particle settling from mono-sized settling systems`, POWDER TECHNOL, 437 (2024), 119545. View paper
  19. Q. Zheng, Y.J. Tian*, W. Wang*, J.Y. Ye, Q.J. Zheng, S.B. Kuang*, `CFD simulation of a cement precalciner with agglomerate-based drag modeling`, POWDER TECHNOL, 436 (2024), 119508. View paper.
  20. P.J. Capdeville, S.B. Kuang*, A.B. Yu, `Unrevealing energy dissipation during iron ore transfer through chutes with different designs`, POWDER TECHNOL, 435 (2024), 119446. View paper.
  21. D.Y. E*, G.T. Xu, H.H. Fan, J.X. Cui, C. Tan, Y.H. Zhang, R.P. Zou, S.B. Kuang*, A.B. Yu, `Numerical investigation of hydrocyclone inlet configurations for improving separation performance`, POWDER TECHNOL, 434 (2024), 119384. View paper.
  22. Q. Ye, S.B. Kuang*, P.B. Duan*, L. Ji, R.P. Zou, A.B. Yu, `Fast prediction and control of air core in hydrocyclone by machine learning to stabilize operations`, J ENVIRON CHEM ENG, (2024), 12 (2024), 111699. View paper.
  23. L.L. Liu*, S.B. Kuang, B.Y. Guo, A.B. Yu, `Combustion characteristics of charcoal, semicoke, and pulverized coal in blast furnace and their impacts on reactor performance`, POWDER TECHNOL, 433 (2024), 119243. View paper.
  24. Y. Fei, X.P. Guan, S.B. Kuang, A.B. Yu, N. Yang*, `A review on the modeling and simulation of shaft Furnace hydrogen metallurgy: A chemical engineering perspective`, ACS ENG AU, 4 (2024), 145-165. View paper.
  25. J. Li*, S.B. Kuang, F.Y. Huang, P.L. Li, A.B. Yu, `CFD-DEM modelling and analysis of proppant transportation inside tortuous hydraulic fractures`, POWDER TECHNOL, 432 (2024), 119155. View paper.
  26. X.Y. Zhang, L.L. Jiao*, J.J. Li, S.B. Kuang, A.B. Yu, `Numerical investigation of the inner profiles in ironmaking blast furnace: Effect of the ratio of belly diameter to effective height`, STEEL RES INT,  95 (2024), 2300420. View paper
  27. Z. Y. Zhu, P. Zhou, X. B. Wan, Z. Chen*, L. Zhang, S. B. Kuang, `CFD modeling of gas-liquid flow phenomenon in the lead smelting oxygen-enriched side-blown furnace`, TRANS NONFERROUS MET SOC CHINA, (2024). View paper
  28. J. Li*, S.B. Kuang, F.Y. Huang, P.L. Li, `CFD-DEM approach to study the proppant transport and placement under different perforation conditions in tortuous hydraulic fractures`, SPE J, 29 (2024), 277–298. View paper.

2023

  1. C. Chang, Q.J. Zheng, Y. Wang*, Z.N. Su, B.Q. Qiang, S.B. Kuang*, `Mass transfer enhancement in liquid-liquid extraction with discrete liquid film flow`, IND ENG CHEM RES, 62 (2023), 17297-17305. View paper
  2. H.Y. Wang, Z. Tan, S.B. Kuang*, A.B. Yu*, `Systematic investigation of centrifugal slurry pump under different operating condition by DDPM method`, POWDER TECHNOL, 430 (2023), 119024. View paper
  3. L. Huang, R.Y. Liu, F.Y. Huang, J.L. Yuan, D.Y. Wen, Q.X. Liu, Y.M. Zhao*, H.S. Jiang*, S.B. Kuang, `Study on classifying particle size and spatial internal flow field of T-shaped tooth structure in a disturbing rotary centrifugal air classifier`, ADV POWDER TECHNOL, 34 (2023), 104230. View paper.
  4. F.Y. Huang, S.B. Kuang*, R.P. Zhou, B. Chaudhuri, A.B. Yu, `Modeling and analysis of particle triboelectrification in pneumatic conveying`, POWDER TECHNOL, 429 (2023), 118970. View paper.
  5. M. Fazli*, M. Rudman, S.B. Kuang, A. Chryss, `Application of Immersed Boundary Methods to Non-Newtonian Yield-Pseudoplastic Flows`, APPL MATH MODEL, 124 (2023), 532-552. View paper.
  6. J.Y. Tian, Y.Q. Gao, X.Y. Ye, F. Huang, Y.W. Zhao, T. Zhang, W. Zhao, X.R. Chen*, H.L. Wang, S.B. Kuang, `Optimizing particle translation and self-rotation by adjusting gravity-driven hydrocyclone inclination angle for separation and activation of granular sludge`, J WATER PROCESS ENG, 54 (2023), 104030. View paper.
  7. A. Gomes de Freitas, R. Borges dos Santos, L.A.M Riascos, J.E. Munive-Hernandez, S.B. Kuang, R.P. Zou, A.B. Yu, `Experimental design and optimization of a novel solids feeder device in energy efficient pneumatic conveying systems, ENERGY REP, 9 (2023), 387-400. View paper
  8. Y. Yu, B.K Li*, Z.Q. Liu*, F.S. Qi, C.J. Liu, W.J. Rong, S.B. Kuang, `Analysis of electrical energy consumption in a novel direct current submerged arc furnace for ferrochrome production`, METALL AND MATERI TRANS B, (2023). 54 (2023), 2370–2382. View paper.
  9. Y. Yu, B.K Li*, Z.Q. Liu*, F.S. Qi, C.J. Liu, W.J. Rong, S.B. Kuang, `Simulation of ferrochrome settling behavior in a submerged arc furnace using a multiphysics and multiphase model`, METALL AND MATERI TRANS B, 54 (2023), 2080-2094. View paper.
  10. J.X. Xu, B.K Li*, F.S. Qi, W.J. Rong, S.B. Kuang, `Modeling effects of skid buttons and dislocated skids on the heating quality of slabs in an industrial walking-beam reheating furnace`, INT J HEAT MASS TRANSFER, 211 (2023), 124245. View paper.
  11. Y. Liu, L.H. Yan, Y.B. Zhang, P. Yuan, L. Ji*, K.W. Chu, Z.Y. Li, S.B. Kuang, `Mini-hydrocyclone performance enhancement in removing small-size microplastics using flocculants`, J WATER PROCESS ENG, 53 (2023), 103755.  View paper.
  12. Xiao*, M. Luo, F.Y. Huang, M.M. Zhou, J.C. An, S.B. Kuang*, Aibing Yu, `CFD‒DEM investigation of gas-solid flow and wall erosion of vortex elbows conveying coarse particles `, POWDER TECHNOL, 424 (2023), 118524. View paper.
  13. P.J. Capdeville, S.B. Kuang*, J.Q. Gan, A.B. Yu, `Micromechanical analysis of granular dynamics and energy dissipation during hopper discharging of polydisperse particles`, POWDER TECHNOL, 422 (2023), 118462. View paper.
  14. J Li, S.B. Kuang*, R.P. Zou, A.B. Yu, `Assessment of shaft gas injection technology for blast furnace ironmaking`, METALL AND MATERI TRANS B, 54 (2023), 913-927. View paper
  15. L.L. Jiao*, S.B. Kuang, A.B. Yu*, Y.T. Li, X.M. Mao, H. Xu, `Numerical simulation of the 3D asymmetric inner states of an ironmaking blast furnace resulting from circumferential non-uniform burden distribution`, METALL AND MATERI TRANS B,  54 (2023), 734-755. View paper
  16. D.Y. E*, H.H. Fan, Z.F. Su, G.T. Xu, R.R. Zou, A.B. Yu, S.B. Kuang*, `Numerical study of the multiphase flows and separation performance of hydrocyclone with tapered cross-section inlet`, POWDER TECHNOL, 416 (2023), 118208. View paper.
  17. J. Ji, P. Paul, B.K. Shanbhag, I. Dixon, S.B. Kuang*, L.Z. He*, `Emerging application of hydrocyclone in biotechnology and food processing`, SEP PURIF TECHNOL, 309 (2023), 122992. View paper.
  18. L.L. Liu, S.B. Kuang*, B.Y. Guo, A.B. Yu*, `Optimization of ironmaking blast furnace operations using an integrated mathematical model`, CHEM ING TECH, 95 (2023), 219-233. View paper
  19. L.L. Liu, S.B. Kuang*, B.Y. Guo, A.B. Yu*, `Injection of COREX off-gas into ironmaking blast furnace`, Fuel, 334 (2023), 126688. View paper

2022

  1. J Li, S.B. Kuang*, R.P. Zou, A.B. Yu, `Numerical investigation of burden distribution in hydrogen blast furnace`, METALL AND MATERI TRANS B, 53(2022), 4124-4137. View paper
  2. Zhao, G.G. Pereira, S.B. Kuang, Z.H. Chai, B.C. Shi*, `A pseudopotential lattice Boltzmann analysis for multicomponent flow`, COMMUN COMPUT PHYS, 32 (2022), 1156-1178. View paper
  3. N.I. Ismail, S.B. Kuang*, E.Z. Zheng, A.B. Yu, `Modeling and analysis of fluid rheology effect on sand screen performance `, POWDER TECHNOL, 411 (2022), 117961. View paper
  4. H.Y. Wang, Z. Tan, S.B. Kuang*, A.B. Yu*, `Numerical modeling and analysis of particle-fluid flow and wall erosion in centrifugal slurry pumps under different solid concentrations`, POWDER TECHNOL, 410 (2022), 117861. View paper
  5. Q. Ye, P.B. Duan*, S.B. Kuang*, L. Ji, R.P. Zou, A.B. Yu, `Multi-objective optimization of hydrocyclone by combining mechanistic and data-driven models`, POWDER TECHNOL, 407(2022), 117674. View paper
  6. Q. Nie, A.B. Yu*, L.L. Jiao, X.M. Mao, H.F. Xu, S.B. Kuang*, Numerical investigation of shaft gas injection operation in oxygen-enriched ironmaking blast furnace, METALL AND MATERI TRANS B, 53(2022), 2712-2734. View paper
  7. N.I. Ismail, S.B. Kuang*, Y.C. Tang, A.B. Yu, `CFD-DEM evaluation of screen types for sand control applications`, POWDER TECHNOL. 404(2022), 117496. View paper.
  8. L.Q. He, L. Ji*, Y.J. He*, Y. Liu, S.Y. Chen, K.W. Chu, S.B. Kuang, `Experimental and numerical analysis of Chinese hamster ovary cell viability loss in mini-hydrocyclones`, SEP PURIF TECHNOL, 295 (2022), 121203. View paper
  9. J Li, S.B. Kuang*, L.L. Jiao, L.L. Liu, R.P. Zou, A.B. Yu, `Numerical modeling and analysis of hydrogen blast furnace ironmaking process`, Fuel, 323 (2022), 124368. View paper.
  10. Z. Zheng*, M. Rudman, S.B. Kuang, A. Chryss, `Dense non-Newtonian suspension flow: Effect of solids properties and pipe size`, AIChE J, 68(2022), e17690. View paper.
  11. L.Q. He, L. Ji*, X. Sun, S.Y. Chen, S.B. Kuang, `Investigation of mini-hydrocyclone performance in removing small-size microplastics`, PARTICUOLOGY, 71(2022),1-10. View paper
  12. L.L. Liu, S.B. Kuang*, L.L. Jiao, B.Y. Guo, A.B. Yu*, `Optimization of pulverization coal injection (PCI) rate in an ironmaking blast furnace by an integrated process model`, Fuel, 315(2022), 122832. View paper.
  13. J. Li, S.B. Kuang*, Z. Qi, P.L. Liu, A.B. Yu, `Experimental investigation of the leak-off effect on proppant transportation and distribution in a vertical fracture`, J NAT GAS SCI ENG, 97(2022), 104358. View paper
  14. D.Y. E*, P. Zhou, S. Guo, J. Zeng, J.X. Cui, Y.Y. Jiang, Y.X. Lu, Z.Y. Jiang, Z.Q. Li, S.B. Kuang, `Particle shape effect on the hydrodynamics and heat transfer in spouted bed: A CFD-DEM study`, PARTICUOLOGY, 69(2022), 10-21. View paper.
  15. N.I. Ismail, S.B. Kuang*, M.M. Zhou, A.B. Yu, `Numerical investigation of non-uniform sand retention behavior in sand screens`, POWDER TECHNOL, 395 (2022).604-617. View paper

2021

  1. F. Xiao*, M. Luo, S.B. Kuang, M.M. Zhou, J.Q. Jing, J.F. Li, R.N. Lin, J.C. An, `Numerical investigation of elbow erosion in the conveying of dry and wet particles`, POWDER TECHNOL, 393 (2021), 265–279. View paper
  2. M.M. Zhou, S.B. Kuang*, F. Xiao, K. Luo, A.B. Yu, `CFD-DEM analysis of hydraulic conveying bends: Interaction between pipe orientation and flow regime`, POWDER TECHNOL, 392(2021), 619-631. View paper.
  3. L. Ji, L.Q. He, K.W. Chu, S.B. Kuang*, `How do particles with sizes close to cut size affect the multiphase flows and performance of hydrocyclones`, IND ENG CHEM RES, 60(2021), 18477–18489. View paper
  4. E.Z. Zheng*, M. Rudman, S.B. Kuang, A. Chryss, `Turbulent coarse-particle non-Newtonian suspension flow in a pipe`, INT J MULTIPHAS FLOW, 142 (2021), 103698. View paper.
  5. L.L. Jiao, S.B. Kuang*, A.B. Yu*, Y.T. Li, X.M. Mao, H. Xu, `Numerical simulation of 3D asymmetric inner states of an ironmaking blast furnace resulting from tuyere closure`, METALL AND MATERI TRANS B, 52 (2021),2642–2658. View paper.
  6. H.Q. Nie, Z.Y. Li, S.B. Kuang*, L.G. Yan, W.Q. Zhong, A.B. Yu*, X.M. Mao, H.F. Xu, `Numerical investigation of oxygen-enriched operations in ironmaking blast furnace`, FUEL, 296(2021), 120662. View Paper.
  7. M. Wang, X.Y. Lan*, C.X. Wang, J.S. Gao, A.B. Yu, S.B. Kuang*, `Numerical simulation of pilot-scale high-density circulating fluidized bed riser` IND ENG CHEM RES 60(2021),  3184–3197. View Paper.
  8. Y. Zhao, G.G. Pereira, S.B. Kuang, B.C. Shi*, `On the pseudopotential lattice Boltzmann model for multicomponent flows with larger viscosity ratio`, APPL MATH LETT 114 (2021), 106926. View Paper.
  9. L.L. Jiao, S.B. Kuang*, A.B. Yu*, Y.T. Li, X.M. Mao, H. Xu, `CFD modeling and analysis of particle size reduction and its effect on blast furnace ironmaking`, METALL AND MATERI TRANS B, 52 (2021), 138–155. View Paper.
  10. N.I. Ismail, S.B. Kuang*, A.B. Yu, `CFD-DEM study of particle-fluid flow and retention performance of sand screen`, POWDER TECHNOL, 378 (2021), 410-420. View Paper.
  11. J. Li, P.L. Li*, S.B. Kuang*, A.B. Yu, `Visual lab tests: Proppant transportation in a 3D printed vertical hydraulic fracture with two-sided rough surfaces`, J PETROL SCI ENG, 196 (2021), 107738. View Paper.

2020

  1. S.B. Kuang*, K. Li, S. Shrestha, A.B. Yu, `Discrete particle simulation of heterogeneous gas-solid flows in riser and downer reactors`, POWDER TECHNOL, 375 (2020),221-232. View Paper.
  2. M.M. Zhou, S.B. Kuang*, K. Luo, R.P. Zhou, S. Wang, A.B. Yu, `Modelling and analysis of flow regimes in hydraulic conveying of coarse particles `, POWDER TECHNOL, 373 (2020), 543-554. View Paper
  3. E.Z. Zheng*, M. Rudman, S.B. Kuang, A. Chryss, `Turbulent coarse-particle suspension flow: Measurement and modelling `, POWDER TECHNOL, 373(2020), 647-659. View Paper
  4. L.L. Liu, B.Y. Guo, S.B. Kuang*, A.B. Yu*, `An Integrated Mathematical Model for Ironmaking Blast Furnace`, METALL AND MATERI TRANS B, 51(2020), 2211-2229. View Paper
  5. Z. Qi, S.B. Kuang*, T.S. Qiu, A.B. Yu*, `Lattice Boltzmann investigation on fluid flows through packed beds: Interaction between fluid rheology and bed properties`, POWDER TECHNOL, 369 (2020), 248-260. View Paper
  6. Q. F. Hou*, D. Y. E, S. B. Kuang, A. B. Yu*, `A transient discrete element method-based virtual experimental blast furnace model`, STEEL RES INT,  91 (2020), 2000071. View Paper
  7. Q.F. Hou*, D.Y. E, S.B. Kuang, A.B. Yu, `A scaling approach for CFD-DEM modelling of thermochemical behaviours in moving bed reactors`, FUEL PROCESS TECHNOL, 202 (2020), 106369.  View paper
  8. Y. Zhao, G.G. Pereira, S.B. Kuang, Z.H. Chai, B.C. Shi*, `A generalized lattice Boltzmann model for solid-liquid phase change with variable density and thermophysical properties`, APPL MATH LETT, 104 (2020), 106250. View paper
  9. F. Xiao, J.Q. Jing*, S.B. Kuang*, L. Yang, A.B. Yu, ` Capillary forces on wet particles with liquid bridge transition between convex and concave’, POWDER TECHNOL, 363 (2020), 59-73. View paper.
  10. L.L. Jiao, S.B. Kuang*, A.B. Yu, Y.T. Li, X.M. Mao, H. Xu, `Three-dimensional modeling of ironmaking blast furnace with layered cohesive zone`, METALL AND MATERI TRANS B, 51 (2020), 258–275. View Paper
  11. S. Shrestha, S.B. Kuang, A.B. Yu, Z.Y. Zhou*, `Effect of van der Waals force on bubble dynamics in bubbling fluidized beds of ellipsoidal particles`, CHEM ENG SCI, 212 (2020), 115343. View Paper
  12. S.B. Kuang*, M.M. Zhou, A.B. Yu*, `CFD-DEM modelling and simulation of pneumatic conveying – A review`, POWDER TECHNOL, 365(2020), 186-207.  (Invited review). View Paper
  13. S.B. Kuang*, K. Li, A.B. Yu*, `CFD-DEM simulation of large-scale dilute-phase pneumatic conveying system`, IND ENG CHEM RES, 59(2020), 4150-4160. View Paper
  14. T.J. Li*, H. Zhang, S.B. Kuang, H. Yan, X.Z. Diao, Z.Y. Huang, H.L. Bo, Y.J. Dong , `Experimental and numerical study of coarse particle conveying in the small absorber sphere system: Overview and some recent CFD-DEM simulations`, NUCL ENG DES, 357 (2020), 110420. View Paper
  15. S. Shrestha, S.B. Kuang, A.B. Yu, Z.Y Zhou*, `Orientation of spheroidal particles in single jet bubbling fluidized beds`, POWDER TECHNOL, 361 (2020), 363-373. View Paper
  16. Z. Miao, S.B. Kuang*, H. Zughbi, A.B. Yu, `Numerical simulation of dense-phase pneumatic transport of powder in horizontal pipes`, POWDER TECHNOL, 361 (2020), 62-73. View Paper

2019

  1. L. Ji, J. Chen, S.B. Kuang*, Z. Qi, K.W. Chu, A.B. Yu*, `Prediction of separation performance of hydrocyclones by a PC-based model`, SEP PURIF TECHNOL, 211(2019), 141-150. View Paper
  2. Y.Q. Zhang, L. Zhang, L. Hou*, S.B. Kuang*, A.B. Yu, ` Modeling of the variations of permeate flux, concentration polarization, solute rejection in nanofiltration system`, AIChE J, 53(2019), 1076-1087. View Paper
  3. Z. Qi, S.B. Kuang*, A.B. Yu* `Lattice Boltzmann investigation of non-Newtonian fluid flow through a packed bed of uniform spheres`, POWDER TECHNOL, 343(2019), 225-236. View Paper
  4. S. Shrestha, S.B. Kang, A.B. Yu, Z.Y. Zhou*, `Particle shape effect on bubble dynamics in central air jet pseudo-2D fluidized beds: A CFD-DEM study`, CHEM ENG SCI, 21(2019), 448-466. View Paper
  5. E.Z. Zheng*, M. Rudman, J. Singh, S.B. Kuang, `Direct Numerical Simulation of Turbulent Non-Newtonian Flow using OpenFOAM`, APPL MATH MODEL, 72 (2019), 50-67. View Paper
  6. Z. Miao, S.B. Kuang*, H. Zughbi, A.B. Yu*, `CFD simulation of dilute-phase pneumatic conveying of powders`, POWDER TECHNOL, 349 (2019), 70-83. View Paper
  7. Z.Y. Li, S.B. Kuang*, S.D. Liu, J.Q. Gan, A.B. Yu*, Y.T. Li, X.M. Mao,’Numerical investigation of burden distribution in ironmaking blast furnace’, POWDER TECHNOL, 353 (2019), 385-397. View Paper
  8. M.M. Zhou, S. Wang, S.B. Kuang*, K. Luo*, J.R. Fan, A.B. Yu, ‘CFD-DEM modeling of hydraulic conveying of solid particles in a vertical pipe’, POWDER TECHNOL, 354 (2019), 893-905. View Paper
  9. S. Shrestha, S.B. Kuang, A.B. Yu, Z.Y Zhou*, `Bubble dynamics in bubbling fluidized beds of ellipsoidal particles`, AIChE J, 65(2019), e16736. View Paper
  10. L. Ji, S.B. Kuang*, A.B. Yu, `Numerical investigation of hydrocyclone feed inlet configurations for mitigating particle misplacement`, IND ENG CHEM RES, 58 (2019), 16823-16833. View Paper

2018

  1. Z. Qi, S.B. Kuang*, L.W. Rong, A.B. Yu, `Lattice Boltzmann investigation of the wake effect on the interaction between particle and power-law fluid flow`, POWDER TECHNOL, 326 (2018), 208-221. View Paper
  2. R.B. Li, S.B. Kuang*, T.A. Zhang*, Y. Liu, A.B. Yu, `Numerical investigation of gas–liquid flow in a newly developed carbonation reactor`, IND ENG CHEM RES, 57 (2018), 380–391. View Paper
  3. S.B. Kuang*, Z.Y. Li, A.B. Yu*, `Review on modelling and simulation of blast furnace`, STEEL RES INT, 89 (2018), 1700071-1/25. (Invited review). View Paper
  4. K.W. Chu*, S.B. Kuang, Z.Y. Zhou, A.B. Yu, `Model A vs. Model B in the modelling of particle-fluid flow`, POWDER TECHNOL, 329 (2018), 47-54. View Paper
  5. H. Zhang, T.J. Li*, Z.Y. Huang, S.B. Kuang*, A.B. Yu, `Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method`, POWDER TECHNOL, 332 (2018), 79-89. View Paper
  6. W.H. Zhang*, C.S. Huang, Y.H. Wang, B.C. Shi, S.B. Kuang, Z.H. Chai, `The computation of strain rate tensor in multiple-relaxation-time lattice Boltzmann model`, COMPUT MATH APPL, 75 (2018), 2888-2902. View Paper
  7. Z.Y. Li*, S.B. Kuang*, A.B. Yu, J.J. Gao, Y. H. Qi, D.L. Yan, Y.T. Li, X.M. Mao, `Numerical investigation of novel oxygen blast furnace ironmaking processes`, METALL AND MATERI TRANS B, 49 (2018), 1995-2010. View Paper
  8. L. Ji, K.W. Chu*, S.B. Kuang, J. Chen, A.B. Yu, `Modelling the multiphase flow in hydrocyclones using coarse-grained VOF-DEM and Mixture-DEM approaches`, IND ENG CHEM RES, 57(2018), 9641-9655. View Paper
  9. S. Shrestha, S.B. Kuang, Z.Y Zhou*, `Particle scale modelling of bubble properties in central air jet gas-solid fluidized beds`, POWDER TECHNOL, 339(2018), 70-80. View Paper

2017

  1. K.X. Jiao, J.L. Zhang*, Z.J. Liu, S.B. Kuang, Y.X. Liu, F. Liu, `Dissection investigation of Ti(C,N) behavior in blast furnace hearth during vanadium titano-magnetite smelting`, ISIJ INT, 57 (2017), 48-54. View Paper
  2. P. Zhao, Q. Li*, S.B. Kuang*, Z.S. Zou, `LBM-LES simulation of the transient asymmetric flow and free surface fluctuations under steady operating conditions of slab continuous casting process`, METALL AND MATERI TRANS B, 48 (2017) 456-470. View Paper
  3. Z.Y. Li, S.B. Kuang*, D.L. Yan, Y.H. Qi, A.B. Yu, `Numerical investigation of the inner profiles of ironmaking blast furnaces: Effect of throat-to-belly diameter ratio`, METALL AND MATERI TRANS B, 48 (2017) 602-618. View Paper
  4. L. Ji, S.B. Kuang*, Z. Qi, Y. Wang, J. Chen, A.B. Yu, `Computational analysis and optimisation of hydrocyclone size to mitigate adverse effect of particle density`, SEP PURIF TECHNOL, 174 (2017) 251-263. View Paper
  5. R.B. Li, T.A. Zhang*, Y. Liu, J.P. Zhou, R.P. Zou, S.B. Kuang, `Characteristics of red mud slurry flow in carbonation reactor`, POWDER TECHNOL 311 (2017) 66-76. View Paper
  6. Q.F. Hou*, D.Y. E, S.B. Kuang, Z.Y. Li, A.B. Yu*, `A DEM-based virtual experimental blast furnace: Quasi-steady model`, POWDER TECHNOL 314 (2017) 557-566. View Paper
  7. Q.F. Hou*, B. Kuang, A.B. Yu, `A DEM-based approach for analysing energy flow in granular and particle-fluid flows`, CHEM ENG SCI, 161 (2017) 67-79. View Paper
  8. R.B. Li, T.A. Zhang*, Y. Liu, S.B. Kuang*, `A reaction method for estimating Gibbs energy and enthalpy of formation of complex minerals`, METALL AND MATERI TRANS B, 48 (2017) 1123–1133. View Paper
  9. P. Zhao, Q. Li*, S.B. Kuang, Z.S. Zou, `Mathematical modelling of liquid slag layer fluctuation and slag droplets entrainment in a continuous casting mould based on VOF-LES method`, HIGH TEMP MATER PROC, 36 (2017) 551-565. View Paper

2016

  1. M.M. Li, Q. Li*, S.B. Kuang, Z.Z. Zou, `Transferring characteristics of momentum/energy during oxygen jetting into the molten bath in BOFs: A Computational Exploration`, STEEL RES INT, 87 (2016) 265-394. View Paper
  2. M.M. Li, Q. Li*, S.B. Kuang, Z.Z. Zou, `Determination of cavity dimensions induced by the impingement of gas jets onto a liquid bath`, METALL AND MATERI TRANS B, 47 (2016) 116-126. View Paper
  3. M. Ghodrat, Z. Qi, S.B. Kuang*, L. Ji, A.B. Yu, `Computational investigation of the effect of particle density on the multiphase flows and performance of hydrocyclone`, MINER ENG, 90 (2016) 55-69. View Paper
  4. M.M. Li, Q. Li*, S.B. Kuang, Z.S. Zou, `Computational investigation of the splashing phenomenon induced by the impingement of multiple supersonic jets onto a molten slag-metal bath`, IND ENG CHEM RES, 55 (2016) 3630-3640. View Paper
  5. C.Y. Song, Y.L. Gui*, S.B. Kuang, S.H. Wang, D.G. Zhao. `Microstructure and wear resistance of a novel Mo-Ni-Si system intermetallic composite with ductile Mo phase`, MATER TRANS, 57 (2016), 721-725. View Paper
  6. Q. Li*, M.M. Li, S.B. Kuang, Z.S. Zou, `Understanding characteristic of abrasion of refractory lining caused by bath oscillation in BOF steelmaking`, JOM, 68 (2016), 3126–3133. View Paper

2015

  1. Q. Li*, M.M. Li, S.B. Kuang, Z.Z. Zou, `Numerical simulation of the interaction between supersonic oxygen jets and molten slag–metal bath in steelmaking BOF process`, METALL AND MATERI TRANS B, 46 (2015) 1494-509. View Paper
  2. Z. Qi, S.B. Kuang*, A.B. Yu, `Numerical investigation of the separation behaviours of fine particles in large-diameter dense medium cyclones`, INT J MINER PROCESS, 142 (2015) 35-45. View Paper
  3. Q. Li*, M.M. Li, S.B. Kuang, Z.S. Zou, ‘Coalescence characteristics of supersonic jets from multi-nozzle oxygen lance in steelmaking BOF’, STEEL RES INT, 86 (2015) 1517-1529. View Paper

2014

  1. K. Li, S.B. Kuang, R.H. Pan, A.B. Yu*, `Numerical study of horizontal pneumatic conveying: effect of material properties`, POWDER TECHNOL, 251 (2014), 15-24. View Paper
  2. S.B. Kuang*, Z. Qi, A.B. Yu, A. Vince, G.D. Barnett, P.J. Barnett, `CFD modelling and analysis of the multiphase flow and performance of dense medium cyclones`, MINER ENG, 62 (2014) 43-54. View Paper
  3. S.B. Kuang*, Z.Y. Li, D.L. Yan, A.B. Yu, `Numerical study of hot charge operation in ironmaking blast furnace`. MINER ENG, 63 (2014) 45-56. View Paper
  4. K.W. Chu*, S.B. Kuang, A.B. Yu, A. Vince, G.D. Barnett, P.J. Barnett, `CFD-DEM Study of the multiphase flow in a dense medium cyclone: Prediction of wear effect`, MINER ENG, 56 (2014), 91-101. View Paper
  5. M. Ghodrat*, S.B. Kuang, A.B. Yu, A. Vince, G.D. Barnett, P.J. Barnett, `Numerical analysis of hydrocyclones with different conical section designs`, MINER ENG, 62 (2014) 74-84. View Paper
  6. Q. Li*, M.M. Li, S.B. Kuang, Z.S. Zou, `Computational study on the behaviours of supersonic jets and their impingement onto molten liquid free surface in BOF steelmaking`, CAN METALL QUART, 53 (2014), 340-351. View Paper
  7. M. Ghodrat*, S.B. Kuang, A.B. Yu, A. Vince, G.D. Barnett, P.J. Barnett, `Numerical analysis of hydrocyclones with different vortex finder configurations`, MINER ENG, 63 (2014) 125-138. View Paper

2010-2013

  1. S.B. Kuang, C.Q. Lamarche, J.S. Curtis, A.B. Yu*, `Discrete particle simulation of jet-induced cratering of a granular bed`, POWDER TECHNOL, 239 (2013) 319-336. View Paper
  2. S.B. Kuang, K. Li, R.P. Zou, R.H. Pan, A.B. Yu*, `Application of periodic boundary condition to CFD-DEM simulation of gas-solid flow in pneumatic conveying`, CHEM ENG SCI, 93 (2013), 214-228. View Paper
  3. M. Ghodrat, S.B. Kuang, A.B. Yu*, A. Vince, G.D. Barnett, P.J. Barnett, `Computational study of the multiphase flow and performance of hydrocyclones: effects of cyclone size and spigot diameter`, IND ENG CHEM RES, 52 (2013), 16019-16031. View Paper
  4. K.W. Chu, S.B. Kuang, A.B. Yu*, A. Vince, `Particle scale modelling of the multiphase flow in a dense medium cyclone: Effect of fluctuation of solids flowrate`, MINER ENG, 33 (2012) 34-45. View Paper
  5. S.B. Kuang, K.W. Chu, A.B. Yu*, A. Vince, `Numerical study of liquid-gas-solid flow in classifying hydrocyclones: effect of feed solids concentration`, MINER ENG, 31 (2012) 17-31. View Paper
  6. S.B. Kuang, R.P. Zou, R.H. Pan, A.B. Yu*, `Gas-solid flow and energy dissipation in inclined pneumatic conveying`, IND ENG CHEM RES, 51 (2012) 14289-302. View Paper
  7. S.B. Kuang, A.B. Yu*, `Micromechanic modelling and analysis of the flow regimes in horizontal pneumatic conveying`, AIChE J, 57 (2011) 2708-25. View Paper
  8. Z.Y. Zhou, S.B. Kuang, K.W. Chu, A.B. Yu*, `Discrete particle simulation of particle-fluid flow: model formulations and their applicability`, J FLUID MECH, 661 (2010) 482–510. View Paper
  9. K.J. Dong, S.B. Kuang, A. Vince, T. Hughes, A.B. Yu*. `Numerical simulation of the in-line pressure jig unit in coal preparation`, MINER ENG, 23 (2010) 301–312. View Paper

2008-2009

  1. S.B. Kuang, A.B. Yu*, Z.S. Zou, `Computational study of flow regimes in vertical pneumatic conveying`, IND ENG CHEM RES, 48 (2009) 6846-6858. View Paper
  2. S.B. Kuang, K.W. Chu, A.B. Yu*, Z.S. Zou, Y.Q. Feng, `Computational investigation of horizontal slug flow in pneumatic conveying`, IND ENG CHEM RES, 47 (2008) 470-480. View Paper
  3. S.B. Kuang, A.B. Yu*, Z.S. Zou, `A new point-locating algorithm under three-dimensional hybrid meshes`, INT J MULTIPHAS FLOW, 34 (2008) 1023-1030. View Paper