Research Staff
Research Staff (Current - 27) | |||||||
|---|---|---|---|---|---|---|---|
# | Name | Institute | Start Year | Sub Project | |||
| 1 | Dr Qinfu (Quentin) Hou | Monash | 2014 | Liquid-solid separation in thickening and/or filtration, Integrated BF process model | qinfu.hou@monash.edu | ||
| 2 | Dr Shibo Kuang | Monash | 2014 | Pneumatic conveying for fly ash, Hydrocyclones, Model studies of three-dimensional distributions within blast furnaces for reliable and efficient operations | shibo.kuang@monash.edu | ||
| 3 | Dr Qijun Zheng | Monash | 2015 | Granular flow in a hopper, Powder mixing and segregation in different mixers | qijun.zheng@monash.edu | ||
| 4 | Dr Shufen Wang | Monash | 2016 | Thin film coating, Development of new technologies for use of low grade iron ore fines related to sintering | shufen.wang@monash.edu | ||
| 5 | Dr Jieqing Gan | Monash | 2016 | Powder mixing and segregation in different mixers, DEM simulation of degradation of iron ore during handling and transportation | jieqing.gan@monash.edu | ||
| 6 | Dr Samuel Lim | Monash | 2017 | Designing thermomechanical processing of Titanium alloy for enhanced manufacturability and mechanical properties | Samuel.Lim@monash.edu | ||
| 7 | Dr Zheng Qi | Monash | 2018 | Lattice Boltzmann investigation of non-Newtonian fluid flow through a packed bed of uniform spheres | zheng.qi@monash.edu | ||
| 8 | Dr Md. Shakhaoath Khan | Monash | 2019 | Multiphase flows system modelling | MS.Khan@monash.edu | ||
| 9 | Dr Siddhartha Shrestha | Monash | 2019 | Development of CFD model for multi-phase reacting flows in metallurgical processes | sid.shrestha@monash.edu | ||
| 10 | Dr Jiang Chen | Monash Suzhou | 2016 | Dense medium cyclones | jiang.chen@monash.edu | ||
| 11 | Dr Huabiao Qi | Monash Suzhou | 2018 | Numerical investigation of granular flow similarity in rotating drums | Huabiao.Qi@simpas.cn | ||
| 12 | Dr Lianhai Zu | Monash Suzhou | 2018 | Nanomaterials, Energy storage | lianhai.zu@simpas.cn | ||
| 13 | Dr Minshu Zhan | Monash Suzhou | 2018 | Gas-solid multiphase flow and separation technology | Minshu.Zhan@simpas.cn | ||
| 14 | Dr Zhen Tan | Monash Suzhou | 2018 | DEM-CFD Analysis on The Influence Mechanism of Electrostatics on Single Bubble in Gas-Solid Fluidized Bed | tanzhen@simpas.cn | ||
| 15 | Dr Bing Wu | Monash Suzhou | 2019 | Bing.Wu@simpas.cn | |||
| 16 | Dr Guanwen Zhou | Monash Suzhou | 2019 | Simulation of coal pressurized pyrolysis process in an industrial-scale spout-fluid bed reactor | Guanwen.Zhou@simpas.cn | ||
| 17 | Dr Jiaqi Yu | Monash Suzhou | 2019 | Jiaqi.Yu@simpas.cn | |||
| 18 | Dr Yongli Wu | Monash Suzhou | 2019 | Multi-scale simulation of particle-fluid flows | Yongli.Wu@simpas.cn | ||
| 19 | Ms Xiaoteng Zhou | Macquarie | 2019 | PM2.5 measurement and control | xiaoteng.zhou@hdr.mq.edu.au | ||
| 20 | Dr Kamyar Kildashti | WSU | 2018 | Particle-scale numerical study on screening processes | K.Kildashti@westernsydney.edu.au | ||
| 21 | Dr Jian Yang | UNSW | 2017 | Investigation of CaO-Al2O3-based mould fluxes for the continuous casting of high-Al steel | j.a.yang@unsw.edu.au | ||
| 22 | Dr Ebrahim Ghasemi Ardi | UNSW | Direct modelling of particle breakage using DEM | ebrahim.ghasemiardi@unsw.edu.au | |||
| 23 | Dr Chandana Jayasundara | UNSW | 2018 | CFD-DEM modelling of dry powder inhalation | chandana@unsw.edu.au | ||
| 24 | Dr Chuhan Wu | UNSW | 2018 | Prediction of surface scratching in sheet metal deep drawing | chuhan.wu@unsw.edu.au | ||
| 25 | Dr Weidong Liu | UNSW | 2018 | Prediction of surface scratching in sheet metal deep drawing | weidong.liu@unsw.edu.au | ||
| 26 | Dr Xiaodong Ma | UQ | 2012 | Precipitation strengthening of microalloying spring steels | x.ma@uq.edu.au | ||
| 27 | Dr Shiliang Wang | UQ | 2018 | Tribological roles of 2D-0D nanocomposites as additives in water based lubricants | shiliang.wang@uq.edu.au | ||
Research Staff (Previous - 11) | ||||
|---|---|---|---|---|
# | Name | Institute | Year | Sub Project |
| 1 | Dr Xavier Choi | Monash | 2016-2017 | Geological sequestration of carbon dioxide in deep saline aquifers: coupled flow-mechanical considerations |
| 2 | Dr Bin Su | Monash | 2016-2018 | Nanotechnology |
| 3 | Dr Yue Tang | Monash | 2016-2018 | Energy-efficient window coatings |
| 4 | Dr Chun Wang | Monash | 2017-2018 | Energy Storage |
| 5 | Dr Minsu Liu | Monash | 2017-2018 | Development of Key Techniques for Generating VO2 Nanoparticles for Smart Window Coatings |
| 6 | Dr Baoyu (Bob) Guo | Monash | 2016-2019 | Electrostatic precipitation (ESP), Complicated flow in BF hearth |
| 7 | Dr Kaiwei (Kevin) Chu | Monash | 2016-2019 | Computational study of the gas-solids flow in gas cyclones: from fundamentals to application |
| 8 | Dr Shaohua Zhang | Monash | 2018-2019 | Nanomaterials |
| 9 | Dr Song Li | Monash | 2018-2019 | Development of Key Techniques for Generating VO2 Nanoparticles for Smart Window Coatings |
| 10 | Dr Sida Liu | Monash Suzhou | 2016-2018 | Numerical investigation of burden distribution in ironmaking blast furnace |
| 11 | Dr Zhaoyang Li | Monash Suzhou | 2016-2019 | Modeling and Simulation of Blast Furnace |