Print production

Paper stock, finishes and print quality should all reinforce the prestige of the Monash University brand.

Paper stock should also take into account the University's sustainability initiatives.

Paper stock

  • Use bright-white paper stock* (our preferred stock is Magno Plus Silk). This reflects openness and modernity. Don't use off-white, flecked or other colours.
  • Stock weight can range from 140-400gsm.
  • Finishes should be smooth and can use coated or uncoated stock. Coated stock should be a matte or satin finish to retain the ability to be marked with a ballpoint pen.

*Where possible, Monash requires the use of manufactured paper stock using low environmental impact FSC® certified pulps sourced from well-managed forests, in a facility that is ISO14001 and ISO50001 accredited. It must also be produced Elemental Chlorine Free (ECF) and be 100% recyclable.

Please contact University Marketing, Admissions and Communications for paper stock exemptions.

Finishes

  • A matte plasticote laminate can be applied to front and back covers.
  • A spot gloss (maximum 20-30% coverage) may be used on front and back covers to highlight the primary message or provide a point of interest.

Colour

  • Ensure that all Monash colours are produced using the CMYK colour breakdowns.
  • Use PMS colours where relevant; don't use the default PMS to CMYK conversion.
  • University Marketing, Admissions and Communications can advise on the most relevant stock for your project and arrange production for collateral designed in-house. Please complete the Brand requests form for assistance.